Tekno RC 8000 EB48.4 1/8 Competition Electric Buggy Kit

**Additional Technical Information Will Be Added When It Appears.**
This is the 1/8 scale Electric Powered, Radio Controlled
EB48.4 Competitors Buggy Kit.

FEATURES:
Chassis: 7075 aluminum 0.16" (4mm) thick
Drive: Four wheel, front and rear universal driveshafts, tapered
    aluminum center driveshaft
Differentials: Three fluid filled adjustable
Shocks: Oil-filled with CNC machined aluminum bleeder shock caps
    that can be utilized to construct vented or non-vented shocks (optional
    bladders required for non-vented shocks), 4mm steel shafts,
    CNC 4×1.9 Flat/Flat Delrin Pistons, and CNC Delrin Guides, brand-new low
    frequency shock springs, high securing spring sets down with
    caught shock boots
Steering: Modified geometry and Ackermann plate, reaction and
    resilience improved with brand-new bearing supported spindles and spindle
    providers, decreased wheel offset for much better efficiency in corners
    adjustable Ackermann and bump-steer, Ackermann refers to the result
    of the inner front wheel rotating quicker that the external front wheel
    throughout turns, optional strong right bell crank for increased
    reaction
Body: Clear polycarbonate, fighter jet motivated with more internal
    clearance, little rear spoilers increase downforce, with with
    adjustable low center of gravity light-weight install
Suspension: Modified broad rear pivot suspension geometry
Motor Mount: 2-piece CNC aluminum with double securing gear mesh
    change, direct-to-diff installing
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when seen from the side of the car in relation to
    the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
    tops of the tires from vertical when seen from front or behind
    automobile

INCLUDES:
EB48.4 Competitors Buggy Package with Clear Body, Shocks, Decals and
    User's manual

REQUIRES:
Radio: 2-channel with high-torque steering servo (at least 300oz-in)
Motor and ESC System: For 1/8 scale buggy
Tires and Wheels: For 1/8 scale buggy
Pinion Equipment: MOD1 15-25 tooth pinion (TKR4175-TKR4185)
LiPo Battery: 4-6S (FOUR at least 5000mAh)
Battery Battery charger, Charging Bag, Paint, CA Glue, tools, building and
    track equipment

SPECIFICATIONS:
Car-
Length: 17.1" (435mm) without wing
Width: 12 - 12.2"* (306-310mm*) *optional centers required
Weight: 7.0pounds (3200g)
Internal Equipment Ratio: 3.33:1
Diff Ratio: F/R - 12/40t, center 44t
Battery Tray Dimensions: 1.97x5.8" (50x148mm) 2x2s or 1x4s config
    Body-
Length:
Width:
Height:

REMARKS:
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set