Manufacturer Description

**Additional Technical Info Will Be Added When It Becomes Available.**
This is the 1/8 scale Electric Powered, Radio Controlled
EB48.4 Competition Buggy Kit.


FEATURES:
Chassis: 7075 aluminum 0.16" (4mm) thick
Drive: Four wheel, front and rear universal driveshafts, tapered
    aluminum center driveshaft
Differentials: Three fluid filled adjustable
Shocks: Oil-filled with CNC machined aluminum bleeder shock caps
    that can be used to build vented or non-vented shocks (optional
    bladders required for non-vented shocks), 4mm steel shafts,
    CNC 4×1.9 Flat/Flat Delrin Pistons, and CNC Delrin Guides, new low
    frequency shock springs, tall clamping spring perches with
    captured shock boots
Steering: Revised geometry and Ackermann plate, response and
    durability improved with new bearing supported spindles and spindle
    carriers, reduced wheel offset for better performance in corners
    adjustable Ackermann and bump-steer, Ackermann refers to the effect
    of the inner front wheel rotating faster that the outer front wheel
    during turns, optional solid right bell crank for increased
    response
Body: Clear polycarbonate, fighter jet inspired with more internal
    clearance, small rear spoilers increase downforce, with with
    adjustable low center of gravity lightweight mount
Suspension: Revised wide rear pivot suspension geometry
Motor Mount: 2-piece CNC aluminum with dual clamping gear mesh
    adjustment, direct-to-diff mounting
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the car in relation to
    the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
    tops of the tires from vertical when viewed from front or behind
    vehicle


INCLUDES:
EB48.4 Competition Buggy Kit with Clear Body, Shocks, Decals and
    Instruction Manual


REQUIRES:
Radio: 2-channel with high-torque steering servo (at least 300oz-in)
Motor and ESC System: For 1/8 scale buggy
Tires and Wheels: For 1/8 scale buggy
Pinion Gear: MOD1 15-25 tooth pinion (TKR4175-TKR4185)
LiPo Battery: 4-6S (4S at least 5000mAh)
Battery Charger, Charging Bag, Paint, CA Glue, tools, building and
    track equipment


SPECS:
Vehicle-
Length: 17.1" (435mm) without wing
Width: 12 - 12.2"* (306-310mm*) *optional hubs required
Weight: 7.0lbs (3200g)
Internal Gear Ratio: 3.33:1
Diff Ratio: F/R - 12/40t, center 44t
Battery Tray Dimensions: 1.97x5.8" (50x148mm) 2x2s or 1x4s config
    Body-
Length:
Width:
Height:


COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set














BOX DIMENSIONS: 9.50" W. X 5.88" H. X 16.88" L.
BOX WEIGHT: 6.40 LBS.