Tamiya Mitsubishi Lancer Evo.X Drift Spec

This is the 1/10 scale, electric powered, radio managed,
Tamiya TT02D Drift Spec Package with the Mitsubishi Lancer Evo.X Body.

FEATURES:
Chassis: Plastic, bathtub type with skid shaped underside to
    lessen contact with the roadway surface area
Own: Four wheel, shaft owned
Motor: Tamiya Sport Tuned 540 brushed with aluminum heat sink
Electronic Speed Control: Tamiya TBLE-02S
LED Lights: LED head and tail lights with TLU-01 controller
Differential: Equipment type
Tires: Slick rubber building and construction, Super Driftech 0.94" (24mm) wide
Wheels: Silver colored mesh type, 1.9" diameter (48.2mm), 0.94"
    (24mm) wide, 12mm hex, +2° offset
Ball Bearings: Protected
Suspension: Fully independent double wishbone
Shocks: CVA Super Mini oil-filled plastic body
Camber: Non-adjustable, camber describes the angle of the tops of the
    tires from vertical when viewed from front or behind automobile
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the car in relation to the
    chassis
Steering: Bellcrank type
Body: Clear untrimmed Mitsubishi Lancer Evo.X with decals and
    window masks
Bumper: Front, foam

CONSISTS OF:
Tamiya TT02D Drift Spec Chassis, with 540 Brushed Motor, Drift Tires,
    Clear Body, 70 tooth Spur Equipment, 22 tooth Pinion, ESC, Decals,
    Window Masks, LED Lights and Controller, Directions and Wheels

REQUIRES:
Radio: 2-channel with high speed steering servo
Battery: 7.2V NiMH
Battery Charger: To match chosen battery
Structure and track equipment

SPECIFICATIONS:
Specs such as completed size and weight of automobile not provided
    by manufacturer
    Body
Length: 18.1" (460mm)
Width: 6.9" (176mm) behind front wheels, widest point
7.5" (190mm) at rear wheels, widest point
Height: 4.2" (106mm)

COMMENTS:
For replacement, Ball Bearings usage:
    Qty. Size Area Qty. Bearing Set
2 5x11mm Spur Equipment 1 DTXC1547
2 5x11mm Driveshaft 1 DTXC1547
2 8x12mm Rear Diff Assembly 1 DTXC1581
2 5x10mm Front Uprights 1 DTXC1535
2 5x10mm Rear Uprights 1 DTXC1535