Rage RC Standard Size Metal Gear Analog Servo, Torque/Speed 142/.16 @6V

This is a standard size, ball bearing, metal equipment servo by Rage RC.

Specs
Size: 40.8 × 20.1 × 38 mm
Weight: 56 g
Operating Speed: 0.18sec/60degree (4.8V), 0.16sec/60degree (6V)
Stall Torque: 9kg.cm/125.2oz.in(4.8V), 10.2kg.cm/141.9oz.in(6V)
Bearing Type: 2BB
Equipment Type: Metal

Want an additional wonderful thing to enhance the above mentioned thing?

Superlift Superide 100mm Scale Shock Absorbers

This is a set of 1/10 scale Superlift Off-Road 100mm Racing Shocks from RC4WD.

FEATURES:
CNC machined billet aluminum building with white painted surface
Internal spring design

CONSISTS OF:
2 Superlift Off-Road 100mm Racing Shocks

NEEDS:
Shock Boots
    Black Rubber Boot Z-S0891, RC4C1891
    Red Rubber Boot Z-S0948
    Yellow Rubber Boot Z-S0962
    Blue Rubber Boot Z-S0961

SPECIFICATIONS:
Hole to Hole (Compressed): 2.85" (72.5mm)
Hole to Hole (Uncompressed): 3.93" (100mm)
General Length: 4.29" (109mm)
Travel Length: 1.22" (31mm)
Shock Body: 0.39" (10mm)
Shaft Diameter: 0.13" (3.4mm)
Stickers Specifications (Length): 1.26" (32mm)
Stickers Specifications (Width): 0.33" (8.6mm)
Weight: 0.49oz (14g)

COMMENTS:
Superlift is a registered hallmark of the Superlift Suspension
    Systems. The Superlift logo design is property of Superlift Suspension
    Systems.

Below is a wonderful thing that many others have purchased the very same time.



This is the RC4WD Steering Linkage set for the Yota II Axles.

FEATURES:
CNC machined aluminum building
Designed to fit the Yota II axles on the RC4WD Trail Finder II

CONSISTS OF:
4.1" (103.5mm) Yota II Steering Link Set (Black)
3.9" (100.5mm) Yota II Steering Link Set (Black)
4 M3 x 15mm Set Screws (Z-S0650)
4 M3 Offset Short Plastic Rod Ends (Z-S0401)

SPECIFICATIONS:
Weight: 0.5oz (14g)

Get this thing to boost the one you read about.



This is the optional RC4WD Chassis Mounted Steering Package with Panhard Bar
    for the Axial SCX-10 Honcho, Jeep Rubicon and Dingo.

FEATURES:
Converts steering servo from axle mounted to chassis mounted with a
    panhard setup
CNC machined aluminum building
Light-weight at only 2.64oz (75g)

CONSISTS OF:
Receiver Box Mount (Black)
Servo Mount (Black)
Panhard Bar Axle Mount (Black)
64mm Link (Gray)
69mm Link (Gray)
78mm Link (Gray)
5 M3 x 6mm BHCS (Black) (Z-S0651)
Six M3 x 8mm BHCS (Black) (Z-S0652)
2 M3 x 10mm BHCS (Black) (Z-S0653)
4 M3 x 12mm BHCS (Black) (Z-S0654)
2 M3 x 16mm BHCS (Black) (Z-S0656)
2 M3 x 20mm BHCS (Black) (Z-S0895)
5 M3 x 8mm FHCS (Black) (Z-S0649)
2 M3 x 14mm SHCS (Black) (Z-S1055)
2 M3 Brief Bent Plastic Rod Ends (Z-S0402)
2 M3 Medium Straight Plastic Rod Ends (Z-S0399)
Six M3 Mini Plastic Rod Ends (Z-S0398)
8 M3 x 15mm Threaded Rods (Z-S0650)

COMMENTS:
Consists of extra link for use on the Axial Dingo set

Below is a wonderful thing that many others have purchased the very same time.

22 AWG X15cm Futaba Extension Leads with Hook on female

Information


RJX  22 AWG X15cm  Futaba Extension Leads with Hook on  female