Suppo Model 10 Amp ESC

10A ESC upgraded with brand-new hardware/software;

brand-new functions: Break on/off programmable function plug and flight.

Features:
Light weight
With 1A BEC
Lipo Battery Automobile-detect
Auto Low battery Slow down at 3.0V/Lipo, cut-off at 2.9V/Lipo
Break on/off
Automobile shut down without signal easy to utilize.

Get this product to improve the one you read about.

1400Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Co

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or little Multi-Rotor frames with Hobbywing 6A esc.

An excellent motor for planes up to 220 grams (8 oz) utilizing 2 li-poly cells. Really lightweight at 19 grams including integral prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and integral firewall install. Great for little 3D planes weighing around 6 oz, or aerobatic planes up to 8 oz. Usage with a 10 Amp brushless ESC and little 7.4V lithium batteries in the 400mah - 800mah range.

The motor features a 3mm solidified steel shaft, dual ball bearings, integral prop saver for APC E props and integral firewall install flange. Keep in mind that the prop saver is sized for APC props. GWS props will require some adjustment to fit correctly. Countersunk mounting holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. performance existing: 2-6 Amp
NoLoad current / 0.3 Amp
Present capacity: 7.5 A/60 s
Max. Efficiency: 74%
Weight with cable televisions: 19g
Measurements (mm): 27.6x11.5

Recomended design weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5