RPM Replacement Bearing Kit For Rpm T/E-Maxx 2.5R/3.3, E-Maxx 16.8 A

This is the replacement Bearing Set for the RPM Revo Axle
Carrier Set - RPMC8581, RPMC8582 and RPMC8585.

FEATURES:
Stainless steel building
Shielded to help keep the bearing tidy and smooth running

CONSISTS OF:
Two 12x21x5mm bearings
Two 6x15x5mm bearings

REQUIRES:
Setup

Right here is an additional product that praises the product being reviewed.

Diff Carrier / X-Ring Gaskets (2) / Ring Gear Gask Et/ 6 X 1

This is the Diff Carrier/Gasket Set for the Traxxas Revo.

FEATURES:
Plastic Diff Carrier
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

CONSISTS OF:
One Diff Carrier
Two Blue Rubber Shaft Gaskets
One Black Rubber Diff Carrier Gaskets
One Gray Washer

REQUIRES:
Assembly to car

This product praises the main item right here.



This is a CVD Coupling Rebuild Kit used for numerous Monster Trucks.
Works for the TMaxx/Emaxx, Revo, Tamiya TNX, Savage 21 & 25, Losi LST

FEATURES:
Black oxide rust preventive finish on the coupling

CONSISTS OF:
(2) Cross pin 2.5 x 16mm
(2) Coupling 6mm diameter x 9mm length
(2) Set screw 4.0 x 3mm

Right here is a great product that lots of others have actually purchased the same time.

Shss M4 X .099 Pin Screw (4)

These are the HW/SHSS M4x0.99 Pin Screws used in the
MIP Super Ball Diff Kit for the 2WD Traxxas Slash.

FEATURES:
Steel building

CONSISTS OF:
Four HW/SHSS M4x0.99 Pin Screws

This product is often purchased with the above pointed out product.

Shss, M3 X .099 Pin Screw (2)

These are the MIP M3 x .099 Pin Screws.

FEATURES:
Steel building

CONSISTS OF:
Two MIP M3 x .099 Pin Screws

The below product additionally pairs actually well with the product being reviewed.

Gear Set, Differential

This is the Differential Gear Set for the Traxxas Revo and E-Maxx.

FEATURES:
Steel building

CONSISTS OF:
Two Output Gears
Two Spider Gears
Spider Gear Shaft and Diff Carrier Assistance
Instruction Sheet

REQUIRES:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Want an additional great product to compliment the above pointed out product?

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for use with the Traxxas Revo 3.3.

FEATURES:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

This product is often purchased with the above pointed out product.

Susp Pin Set Frnt Or Rr Hardend Steel 3 X 20Mm (4) 3 X

This is the Steel Suspension Pin Set for the Traxxas Revo.
They are likewise typically called Hinge Pins.

FEATURES:
Steel building
Sleek finish

CONSISTS OF:
Two Long Suspension Pins
Four Brief Suspension Pins

REQUIRES:
Assembly to car
If the Caster Spacers are requirement, use TRAC5134

SPECS:
Long Suspension Pin Length: 85mm (3.35")
Brief Suspension Pin Length: 24mm (0.95")
Pin Size: 3.3mm (0.13")