Quantum EC3 Parallel Charge lead 6 output

Quantum EC3 Parallel Charge lead 6 output Q-CL-0022

Outstanding quality charge lead.

You will certainly like this product if you have the product just above stated.



Don't wish to chop the existing adapter off of your ESC or battery? Wish to conserve yourself a bunch of soldering time? This EC3 Female to Traxxas Male Conversion Adapter is the fast, simple and budget friendly option for your mismatched adapter.

Here is one more thing that compliments the thing being discussed.



This is the replacement Screw Bag B for the Tamiya
Super Clodbuster Monster Truck

FEATURES:
Steel building

CONSISTS OF:
41 3x8mm self threading screws (phillips head)
46 3x12mm self threading screws (phillips head)
57 3mm shoulder nuts
2 3x20 shoulder screws (phillips head)
2 3x28 shoulder screws (phillips head)

REQUIRES:
Installation following the set manual

You will certainly like this product if you have the product just above stated.



This thing compliments the above discussed thing.



This is the Li-Po Battery Safety Bag by Group C Racing

Lots of others have bought this thing along with the thing that you are presently reading about.



This is the Screw Bag for the Thunder Tiger Raptor 30 Helicopter.

FEATURES:
Steel building
Black and silver in color

CONSISTS OF:
Two M3x20mm socket screws
6 M3x10mm socket screws
6 M3x12mm socket screws
6 M3x140mm socket screws
4 M3x20mm socket screws
6 M3x25mm socket screws
6 M3x32mm socket screws
6 M3x8mm socket screws
6 M3x10mm set screws
6 M3x18mm set screws
6 M4x5mm set screws

REQURIES:
Installation into helicopter

Here is one more thing that compliments the thing being discussed.

Paraboard - Parallel Charging Board for Lipos with EC3 Connector

Don't spend all day charging your batteries one at a time.
This Paraboard lets you charge and stabilize up to six lipo batteries simultaneously! This board features EC3 plugs for your batteries' primary leads and JST-XH balance plugs varying from TWO to 6S. They plug right into a lot of popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.
To get the most out of your Paraboard, get among our GT-400 chargers. It provides 400W of total charging power and charge rates of approximately 20 amps! This paraboard has a maximum charge rate of 30 amps.
Battery packs need to be of the exact same cell count (just charge TWO with TWO, 3S with 3S, etc.) and battery voltages need to be within 0.1V per cell (0.1V for 1S, 0.2V for TWO, etc.) of all other batteries connected to the Paraboard at the exact same time. Use a Cell Spy or similar voltage tester to examine the voltage of each cell prior to connecting to the Paraboard.