Common Sense RC Paraboard - Parallel Charging Board for Lipos with EC3 Connector

Don't spend all the time charging your batteries one at a time.
This Paraboard lets you charge and balance approximately six lipo batteries at once! This board features EC3 plugs for your batteries' main leads and JST-XH balance plugs varying from 2S to SIX. They plug right into many popular models of SIX lipo balancing battery chargers that have 7-pin balance ports with 2.5mm pin spacing.
To get the most from your Paraboard, pick up one of our GT-400 battery chargers. It provides 400W of overall charging power and charge rates of approximately 20 amps! This paraboard has an optimum charge rate of 30 amps.
Battery packs must be of the very same cell count (just charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for ONE, 0.2V for 2S, etc.) of all other batteries linked to the Paraboard at the very same time. Use a Cell Spy or comparable voltage tester to inspect the voltage of each cell before linking to the Paraboard.

Regularly acquired with the thing that you are currently reviewing.



Don't wish to slice the existing adapter off of your ESC or battery? Wish to save yourself a lot of soldering time? This EC3 Female to Traxxas Male Conversion Adapter is the fast, easy and budget-friendly option for your mismatched adapter.

Right here is one more thing that praises the thing being reviewed.

XT60 Female to EC3 Male Conversion Adapter

Don't wish to slice the existing adapter off of your ESC or battery? Wish to save yourself a lot of soldering time? This XT60 Female to EC3 Male Conversion Adapter is the fast, easy and budget-friendly option for your mismatched adapter.

Right here is a wonderful thing that numerous others have purchased the very same time.



This is the replacement Screw Bag B for the Tamiya
Super Clodbuster Beast Truck

FUNCTIONS:
Steel building

CONSISTS OF:
41 3x8mm self threading screws (phillips head)
46 3x12mm self threading screws (phillips head)
57 3mm shoulder nuts
2 3x20 shoulder screws (phillips head)
2 3x28 shoulder screws (phillips head)

REQUIRES:
Installation following the kit manual

The below thing also sets actually well with the thing being reviewed.



This thing is often acquired with the above stated thing.



This is the Li-Po Battery Security Bag by Team C Racing

You will like this product if you have the product just above discussed.



This is the Screw Bag for the Thunder Tiger Raptor 30 Helicopter.

FEATURES:
Steel building
Black and silver in color

CONSISTS OF:
Two M3x20mm socket screws
Six M3x10mm socket screws
Six M3x12mm socket screws
Six M3x140mm socket screws
Four M3x20mm socket screws
Six M3x25mm socket screws
Six M3x32mm socket screws
Six M3x8mm socket screws
Six M3x10mm set screws
Six M3x18mm set screws
Six M4x5mm set screws

REQURIES:
Installation into helicopter

Right here is a wonderful thing that numerous others have purchased the very same time.

EC3 Parallel Charge lead 6 output

Quantum EC3 Parallel Charge lead 6 output Q-CL-0022

Outstanding quality charge lead.