Traxxas Slash 4x4 Platinum SC Racing Truck

This is the brushless electric powered, radio controlled, nearly prepared to run
1/10 scale Traxxas Slash 4x4 Platinum Edition Short-Course Racing Truck.
The distinctions between this variation and the 6804 are a new Low CG Chassis
and GTR High Volume Shocks on the 6804R.

Needs transmitter, receiver, batteries, charger
and paint for the body.

FEATURES:
Chassis: Nylon composite construction 0.08" (2mm) thick bathtub type
Drive: Four wheels of chassis
Electronic Speed Control: Traxxas VXL-3S water resistant, with high-
    present adapter, training mode, reverse and low voltage
    detection for usage with TWO and 3S LiPo loads
Motor: Traxxas Velineon 3500 with ultra high temperature level
    Neodymium magnets and high speed ball bearings
Stimulate Gear: 45 tooth
Pinion Gear: 31 tooth 48 pitch, additional pinion gear consisted of for 50+
    Miles Per Hour operation with additional battery
Body: Clear polycarbonate with overspray film and window masks
Bumpers: Front and rear, composite construction
Shocks: Difficult anodized oil-filled aluminum body GTR with PFTE coated
    13mm bores and titanium nitride shafts for smooth, consistent
    damping
Suspension: C-hub design, front and rear sway bars
Transmission: Ball bearing equipped
Differentials: Sealed silicone filled planetary gear type, center
    diff installs trackside in minutes changing the Torque Control
    slipper
Ball Bearings: Rubber sealed
Caster: Non-adjustable
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when seen from front or behind automobile
Tires: Accredited BF Goodrich soft substance Mud Surface T/A 4.3"
    (109mm) size, 1.7" (43mm) broad
Wheels: 5-spoke brushed chrome, 0.98" (25mm) broad, 1.4" (35mm)
    size, conventional size 12mm hex, aluminum wheel nuts
Steering: Blue anodized aluminum steering obstructs, spring packed servo
    protection, high torque digital ball bearing servo

INCLUDES:
ARR Traxxas Slash 4x4 Platinum Edition Short-Course Racing Truck with
    steering servo, decals, aluminum C-hubs, steering blocks, rear center
    providers and axle nuts, additional swaybar set, Huge Bore shocks, clear
    body, Velineon 3500 brushless motor and instruction manual

REQUIRES:
Radio: 2-channel transmitter with receiver
AA Cells: Eight for transmitter
Battery:
Charger:
Paint: Polycarbonate safe spray or brush-on

SPECS:
Car-
Length: 22.36" (568mm)
Width: 11.65" (296mm)
Height: 8.42" (214mm)
Front and Rear Track: 11.65" (296mm) distance between external edges of
    wheels side-to-side
Ground Clearance: 2.5"
    Body-
Length: 21.25" (540mm)
Width: 11.5" (292mm)
Height: 5.5" (140mm)

REMARKS:
The ball bearings in the Traxxas Slash 4x4 are rubber closed.
Following are the stock numbers for the replacement bearings from
    Traxxas and non-rubber sealed options from Duratrax;
    Qty. Size Area Qty. Bearing Set
2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511
2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511
2 4x8mm Fr Diff 1 TRAC7019 DTXC1511
2 5x8mm Steering Bellcrank 1 TRAC6728 DTXC1523
2 4x7mm Rocker Arm Post 2 DTXC1507
4 8x12mm Differentials 2 TRAC7020 DTXC1581
4 4x8mm Differentials 2 TRAC7019 DTXC1511
6 4x8mm Transmission 3 TRAC7019 DTXC1511
2 4x8mm Rear Ring Gear 1 TRAC7019 DTXC1511