Traxxas Ez-Peak Plus 4Amp Nimh/Lipo Charger W/ Id Automstic Battery Iden

This is the Traxxas AC Powered EZ-Peak Plus Battery Charger
with iD Car Battery Identification.

FEATURES:
Charges 2-3S LiPo batteries, and 5-8 cell NiMH/NiCd batteries
Acknowledges Traxxas iD batteries and immediately programs and
    optimizes battery charger settings
One button LiPo storage charge
4amp fast charging
2S/3S Built-in balance ports for standard LiPo batteries
    located under Traxxas nameplate to the left of output port
Charge progress indication
High resolution peak detection
Storage mode prepares LiPo batteries for extended storage
Advanced mode for full manual control, and also for batteries that
    do not have the iD Car Battery Recognition
Easy to utilize user interface
Built-in cooling fan
Thirty day restricted warranty through Traxxas beginning at date of
    purchase

CONSISTS OF:
EZ-Peak Plus Battery Charger with AC Power Cable and Guidelines

REQUIRES:
LiPo charging bag

SPECIFICATIONS:
AC Input: 100-240 volts
Charge Current Variety: 1.0 - 4.0A (40W max)
Discharge Current Variety: 500mAh
Existing Drain for Balance Ports: 500mAh
NiMH Battery Cell Count: 5-8 cells
LiPo Cell Count: 2-3 cells
Net Weight: 12.8oz (365g)
Dimensions: 5.7 x 4.8 x 2.08" (146 x 123 x 53mm)

This product is regularly purchased with the above mentioned product.

5000Mah 11.1V 3S 25C Ml Lipo

This is the Traxxas Power Cell 11.1V 5000mAh 25C THREE LiPo Battery.

FEATURES:
Semi rigid building and construction does not need a hard case and eliminates
    wire harness ports that can loosen and fail
Engineered specifically to fit Traxxas designs
New high existing adapter with gold-plated copper terminals and
    integrated balance adapter
iD Car Battery Recognition permits Traxxas iD geared up battery chargers to
    immediately set and optimize charge settings for specific battery
MAXX cable high-efficiency 12 gauge silicone jacketed wire

CONSISTS OF:
Traxxas Power Cell 11.1V 5000mAh 25C LiPo THREE Battery with High
    Existing Connector and Integrated Balance Plug

REQUIRES:
LiPo compatible battery charger such as the Traxxas EZ-Peak Plus, TRAP2970
LiPo charging bag

SPECIFICATIONS:
Configuration: 3S1P
Continuous Discharge: 25C (125A)
Max Burst Rate: 50C (250A)
Watt Hours: 55.5
Charge Rate: 1C (5A)
Max Charge Rate: 2C (10A)
Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)
Weight: 13.3oz (376g)

COMMENTS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents higher than 1C
NEVER EVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER dismantle or customize pack wiring in any way or leak cells
NEVER place on flammable products or leave unattended during
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY shut out of reach of children

Want one more great product to match the above mentioned product?

5800Mah 7.4V 2-Cell 25C Lipo

This is the Traxxas Power Cell iD 7.4V 5800mAh 25C 2S LiPo Battery.

FEATURES:
Semi rigid building and construction does not need a hard case and eliminates
    wire harness ports that can loosen and fail
Engineered specifically to fit Traxxas designs
New high existing adapter with gold-plated copper terminals and
    integrated balance adapter
iD Car Battery Recognition permits Traxxas iD geared up battery chargers to
    immediately set and optimize charge settings
MAXX cable high-efficiency 12 gauge silicone jacketed wire

CONSISTS OF:
Traxxas Power Cell 7.4V 5800mAh 25C LiPo 2S Battery with High
    Existing Connector

REQUIRES:
LiPo compatible battery charger such as the Traxxas EZ-Peak Plus, TRAP2970
LiPo charging bag

SPECIFICATIONS:
Configuration: 2S2P
Continuous Discharge: 25C (145A)
Max Burst Rate: 50C (290A)
Watt Hours: 42.92
Charge Rate: 1C (5.8A)
Max Charge Rate: 2C (11.6A)
Dimensions: 5.3 x 0.98 x 1.8" (135 x 25 x 45mm)
Weight: 10.2oz (290g)

COMMENTS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents higher than 1C
NEVER EVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER dismantle or customize pack wiring in any way or leak cells
NEVER place on flammable products or leave unattended during
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY shut out of reach of children