Traxxas Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Durable steel construction

CONSISTS OF:
2 48mm pins
2 34mm pins
2 30mm pins
2 28mm pins
2 25mm pins

NEEDS:
Installation on the Rustler, Stampede or Bandit

REMARKS:
For a total suspension pin set order TRAC4940

Regularly bought with the item that you are presently reading about.

Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Building

CONSISTS OF:
2 Blocks

NEEDS:
Traxxas Rustler or Stampede

Regularly bought with the item that you are presently reading about.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

CONSISTS OF:
One left and right steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

You will like this product if you have the product just above mentioned.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon construction

CONSISTS OF:
2 Front bearing (center) carriers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

Lots of others have bought this item together with the item that you are presently reading about.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs install to the front A-arms and is what the
guiding knuckles connect to.

FEATURES:
Nylon construction, black in color
Stamped right and delegated guarantee right installation

CONSISTS OF:
2 RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and guiding knuckles

This is a superb addition to the item presently being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Lots of others have bought this item together with the item that you are presently reading about.

Suspension Pins 44Mm Slash Rustler / Stampede / Bandit

This is a pair of chrome suspension pins used to hold the front suspension arms
on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER.

Includes: 2 chrome suspension pins and two "E" type keeping clips.

Requires:nothing parts are a direct replacement.

Specs:3mm x 44mm pins are notched for the 3MM "E" type keeping clips at each
end. WLG 9-29-97

Regularly bought with the item that you are presently reading about.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FEATURES:
Fiberglass Building

CONSISTS OF:
One Tie Bar

NEEDS:
Suspension Pins (TRAC4940)

SPECIFICATIONS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Thickness: 2.0 mm (0.082")

REMARKS:
None

This item compliments the main item below.

Front Axles (2) (R & S)

This is a Set of Stock Replacement Front Axles for the Rustler and Stampede.
These are located in the front steering blocks.

FEATURES:
Steel construction
Natural color

CONSISTS OF:
2 front axles

NEEDS:
Nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Size: 5mm

REMARKS:
These will not work for the nitro versions. For that axle, usage
    TRAC2536.