Traxxas 5 X 8 X 2.5Mm Ball Bearing (2) Blue Rubber Shield Revo

This is a 2 pack of Traxxas 5X8mm Ball Bearings.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X8mm ball bearings Part #5114

SPECS:
Inside size: 3/16" (5mm)
Outside size: 5/16" (8mm)
Width: 3/32" (2.5mm)

Below is another product that compliments the product being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This product compliments the above reviewed product.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Shielded with blue rubber seals

CONSISTS OF:
Two Ball Bearings

NEEDS:
Assembly to automobile

SPECS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Density: 4mm

REMARKS:
These bearings are used to support the Main Clutch (one needed).

You will love this product if you have the product just above pointed out.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless Steel Construction
Blue Rubber Sealed

CONSISTS OF:
Two 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

NEEDS:
Assembly onto Car

SPECS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Density: 4mm (0.15")

REMARKS:
These are for the Within the Wheel Centers, the Truck Needs
4 Overall of these Bearings.

This product compliments the main item below.

4 X 7 X 2.5Mm Bearings (2) (Rubber Shield

These are a set of 4x7mm Rubber Sheilded Bearings
from Traxxas for use on the Jato 2.5.

FUNCTIONS:
Rubber protected
Steel construction

CONSISTS OF:
Two rubber protected bearings

NEEDS:
Nothing

SPECS:
Density: 2.6mm
Inner Diameter: 4mm
Outer Diameter: 7mm

You will love this product if you have the product just above pointed out.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel construction
Blue rubber dirt shields

CONSISTS OF:
(2) ball bearings, Part #5117

SPECS:
Inside size: 6mm
Outside size: 12mm
Width: 4mm

REMARKS:
This bearing set is used in the transmission and differentials of
    the Revo.

Below is another product that compliments the product being reviewed.

Steering Arm Mount Steering St

    This is the Steering Arm Mount for the Traxxas Revo.

FEATURES:
Black plastic construction
Requirement and maximum throw steering stops

CONSISTS OF:
Steering arm install Part #5343X
Guiding stop #5343X

NEEDS:
Installation on the Traxxas Revo

You will love this product if you have the product just above pointed out.

Push Rod (Molded Composite) (4

These are the Pushrods and Hollow Balls for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Molded composite construction
Red in color

CONSISTS OF:
4 Pushrods
8 Hollow Balls

NEEDS:
Installation on the automobile

SPECS:
Length: 70mm (2.8")
Diameter: 5mm (0.20")

This product compliments the above reviewed product.

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FUNCTIONS:
Nylon construction
Black in color

CONSISTS OF:
One Front Bumper
One Bumper Mount
Two 3x25mm Button Cap Screws
Two 4x10mm Button Cap Screws

NEEDS:
Installation on the automobile