Dromida Battery Hold Down BX MT SC 4.18

This is the Battery Hold Down for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic construction
Fits over front and rear battery posts to hold battery in place

CONSISTS OF:
Battery Hold Down

Want one more excellent product to enhance the above stated product?

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel construction

CONSISTS OF:
Ten Body Clips

This product is often gotten with the above stated product.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic construction
Fits front or rear suspension

CONSISTS OF:
Two Lower Suspension Arms

Want one more excellent product to enhance the above stated product?



This is the DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Load.

FEATURES:
For use with the Duratrax Vendetta, Mini Quake and Cliff Climber however
    can likewise be used in other 1/18 scale applications

CONSISTS OF:
DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Load with mini
    female port

REQUIRES:
Battery charger capable of charging NiMH batteries, such as the DuraTrax
    IntelliPeak series or the Great Planes TRITON series

SPECS:
Capacity: 1600mAh
Cell Size: 2/3A
# of Cells in Series: 6
Ranked Voltage: 7.2V
Minutes. Discharge Voltage: 5.4V
Optimum Recommended Charge Current: 1.2A
Discharge Lead: 20AWG 2.4" (60mm) long wire
Pack Measurements: 86 x 34 x 17mm (3.38 x 1.33 x 0.66 inches)
Weight: 147g (5.2oz)
Variety of welds per connection: 6
Port: 1/18 scale mini female

This product compliments the above discussed product.



This is the stock 370 size Brushed Motor
for the Dromida SC, MT and BX Vehicles.

FEATURES:
Changes used or broken stock motors

CONSISTS OF:
370 size Brushed Motor with Port and 22AWG Wire Leads
Two 3x6mm Socket Head Cap Screws
Two 3x6mm Washers

This product is often gotten with the above stated product.

Battery Post Set BX MT SC 4.18

This is the Battery Post Set
    for the Dromida MT4.18, SC4.18, and BX4.18 Vehicles.

FEATURES:
Composite plastic construction

CONSISTS OF:
Two Battery Posts
Two 2x7mm Screws
Two Clips

This is a great enhancement to the product presently being discussed.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of put together differential

CONSISTS OF:
4 O-Rings
    4 Springs, essential #35

This product is often gotten with the above stated product.



This is the Servo for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Changes used or broken steering servos
Waterproof under typical operating conditions

CONSISTS OF:
Steering Servo with Wire Lead and Port

SPECS:
Measurements: 0.94 x 0.85 x 0.46" (24 x 21.5 x 11.8mm)
Weight: 0.39oz (11g)
Specifications such as speed and torque not supplied by producer

Regularly gotten with the product that you are presently reading about.



This is the Front Bumper for the Dromida DB4.18 Desert Buggy.

FEATURES:
Constructed of plastic and aluminum

CONSISTS OF:
Bumper Assembly with Aluminum Plate
Mounting Hardware