Dromida Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building
Fits front or rear suspension

CONSISTS OF:
Two Lower Suspension Arms

The listed below item additionally sets actually well with the item being talked about.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building with steel pins
Fits front and rear drive systems

CONSISTS OF:
4 Dogbones

You will love this thing if you have the thing earlier pointed out.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Fastens A-Arms to chassis

CONSISTS OF:
Two Front and two Rear Inner Hinge Pins

Several others have actually gotten this item in addition to the item that you are currently reviewing.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of put together differential

CONSISTS OF:
4 O-Rings
    4 Springs, key #35

Want one more excellent item to match the above discussed item?

Hinge Pin Holder Set BX MT SC 4.18 (2)

This is the Hinge Pin Holder Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building with steel pins
Fits front and rear drive systems

CONSISTS OF:
One Front and one Back Hinge Pin Holder
Two 2x14mm Flat Head Screws
Two 2x10mm Flat head Screws

This item is regularly gotten with the above discussed item.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building

CONSISTS OF:
Ten Body Clips

The listed below item additionally sets actually well with the item being talked about.

Hinge Pin 2x22mm BX MT SC 4.18 (4)

These are the 2x22mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Fastens A-Arms to front and rear uprights

CONSISTS OF:
Two Front and two Rear Outer Hinge Pins

This item compliments the above talked about item.

Shock Long BX MT SC 4.18 (2)

This is a set of Long Shocks for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic bodies
Put together and ready to install

CONSISTS OF:
Two Long Shocks
Two each 1mm, 2mm and 4mm Preload Spacers
Two Spring Clamps

This is a wonderful addition to the item currently being talked about.



This is the Front Bumper for the Dromida DB4.18 Desert Buggy.

FEATURES:
Constructed of plastic and aluminum

CONSISTS OF:
Bumper Assembly with Aluminum Plate
Installing Hardware

Below is a excellent item that lots of others have actually bought at the same time.

Wheel Axle Set BX MT SC 4.18 (4)

This is the Wheel Axle Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building

CONSISTS OF:
4 Axles
4 2.5mm O-Rings

This item compliments the above talked about item.

Linkage Set BX MT SC 4.18

This is the Linkage Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic and metal building

CONSISTS OF:
Two Plastic Tie Rods
Steering Rod with Ball Cups
4 Metal Camber Rods with 8 Long Ball Cups

This item compliments the above talked about item.



This is the Servo for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Replaces used or damaged steering servos
Water resistant under regular operating conditions

CONSISTS OF:
Steering Servo with Wire Lead and Port

SPECIFICATIONS:
Measurements: 0.94 x 0.85 x 0.46" (24 x 21.5 x 11.8mm)
Weight: 0.39oz (11g)
Specifications such as speed and torque not provided by producer