Dromida Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel construction

CONSISTS OF:
10 Body Clips

This thing praises the main item here.



This is the DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Load.

FEATURES:
For usage with the Duratrax Vendetta, Mini Quake and Cliff Climber however
    can likewise be used in other 1/18 scale applications

CONSISTS OF:
DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Load with mini
    female connector

NEEDS:
Battery charger with the ability of charging NiMH batteries, such as the DuraTrax
    IntelliPeak series or the Great Planes TRITON series

SPECIFICATIONS:
Capability: 1600mAh
Cell Size: 2/3A
# of Cells in Series: 6
Ranked Voltage: 7.2V
Minutes. Discharge Voltage: 5.4V
Optimum Recommended Charge Current: 1.2A
Discharge Lead: 20AWG 2.4" (60mm) long wire
Pack Dimensions: 86 x 34 x 17mm (3.38 x 1.33 x 0.66 inches)
Weight: 147g (5.2oz)
Number of welds per connection: 6
Adapter: 1/18 scale mini female

Frequently acquired with the thing that you are presently reviewing.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic construction
Fits front or rear suspension

CONSISTS OF:
2 Lower Suspension Arms

You will like this thing if you have the thing earlier pointed out.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic construction with steel pins
Fits front and rear drive systems

CONSISTS OF:
4 Dogbones

This thing praises the main item here.



This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of assembled differential

CONSISTS OF:
4 O-Rings
    4 Springs, crucial #35

Want another fantastic thing to enhance the above mentioned thing?



This is the optional Aluminum Dogbones
for the Dromida SC4.18, MT4.18 and BX4.18.

FEATURES:
Aluminum construction, blue in color
Replaces stock plastic dogbones
Fits front and rear drive systems

CONSISTS OF:
4 Aluminum Dogbones

Below is another thing that praises the thing being talked about.



This is the Servo for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Replaces worn or broken steering servos
Waterproof under typical operating conditions

CONSISTS OF:
Steering Servo with Wire Lead and Adapter

SPECIFICATIONS:
Dimensions: 0.94 x 0.85 x 0.46" (24 x 21.5 x 11.8mm)
Weight: 0.39oz (11g)
Specs such as speed and torque not supplied by manufacturer

You will like this thing if you have the thing earlier pointed out.



This is the Battery Hold Down for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic construction
Fits over front and rear battery posts to hold battery in place

CONSISTS OF:
Battery Hold Down

Frequently acquired with the thing that you are presently reviewing.



This is the Front Shock Tower for the Dromida MT Monster Truck, DIDC0042.

FEATURES:
Formed plastic construction, black in color

CONSISTS OF:
Front Shock Tower
2 Ball Studs
4 2x8mm Round Head Screws
One Body Clip