Pit Bull 1.55 Growler At/Extra W/Komp Kompound, Crawler Tire

Pit Bull Growler AT/Extra 1.55 Scale Cralwer Tires are miniaturized versions of the renowned Pit Bull Growler LT 1:1 tire. With special multi-varied directional tread you get a directional look with non-directional functionality. These Scale Growlers have actually been designed to increase control while enhancing stability and contact patch, providing excellent lateral bite, incredible stickiness and remarkable traction.

Features:

Komp Kompound: Gets better and much better as they break in and you can use them for your everyday hobby time in addition to competition.
Multi-varied Distinct Tread Blocks: With numerous different lugs and edges, these assistance to maximize traction especially in off-camber situations.
Inside Ribbing: Supplies sidewall assistance and stability.
Thicker Beads: More area for the Beadlocks to bite on.
Integrated Sidewall Protectors: Bands of rubber in the sidewall that add assistance and control.
Alternating Center Lugs: Increased biting edges for enhanced traction.
Sipes: Resembles the real tire and assists increase traction.
Over-the-Shoulder Lugs: Covers down the sidewall and includes extra strength & traction to the shoulder & sidewall areas.
4.19 inch Unmounted Size: These tires are best in the "Sweet Area" for many Scale rigs (Dimensions might vary depending on mounted rim used).
Foam Consisted of: Two 2 stage foams designed to highlight the efficiency of our 1.55 Growler Scale tires. Need to be usable with other tire brand names as well.

Specifications:

Substance: Komp Kompound

Rim: 1.55"

Width: 1.43"*

Outer Size: 4.65"*

Weight: Approx. 2.4oz per tire

Outer foam insert: 110mm (OD) x 72mm (ID) x 43mm (Thick) and the density is 25kg/m3 - approximate measurements*

Inner foam insert: 72mm (OD) x 36m (ID) x 28mm (Thick) and the density is 32kg/m3 - approximate measurements*

*Dimensions might vary depending on installing rim used

Want another fantastic product to enhance the above pointed out product?



This is a bundle of 10 2.5x8mm Caphead Screws from HPI.

FEATURES:
Steel construction

CONSISTS OF:
Ten 2.5x8mm Caphead Screws

NEEDS:
2mm hex wrench, GPMR8011

SPECS:
Length: 8mm
Size: 2.5mm