HPI 1/10 Venture Toyota FJ Cruiser Gunmetal 4WD RTR

**Extra Technical Information Will Be Added When It Appears.**

This is the 1/10 scale Electric Powered, 2.4GHz Radio Controlled
Prepared to Run Toyota FJ Cruiser Venture Spider in Gunmetal Gray from HPI.

FEATURES:
Chassis: Steel C-channel chassis rails and cross braces, adjustable
    side sliders
Own: Four wheel with central transfer case, telescoping driveshafts
    and strong axles with metal diff covers
Differentials: Full-time locked, aluminum pumpkin size cover for best
    ground clearance
Transfer Case: Straightens and reduces center drive shafts for
    efficient power transfer, avoids motor stall for best climbing up
    action
Motor: Front installed 35 turn crawler spec
ESC: HPI water resistant SC-3sWP2 Spider Edition
Battery Box:
Radio: HPI TF-40 2.4GHz 3-channel system with water resistant receiver,
    and HPI water-resistant SS-20WR guiding servo
Body: Cut and painted officially licensed Toyota FJ Cruiser with
    practical roofing rack, mirrors, front bumper with brush guard,
    light installs and D-ring shackles, rear bumper with swing away
    spare tire mount and D-ring shackles, adjustable body installs for
    any style off-road body, full braced rear installs
Shocks: Oil-filled, aluminum body, double phase springs
Shock Towers: Composite plastic
Steering: BTA (Behind the Axle) linkage for enhanced technique and
    departure angles, CMS (Chassis Installed Servo) sensible setup
    Absolutely no Ackermann high steer knuckle design for much better clearance and
    tighter turning radius, Ackermann describes the result of the inner
    front wheel turning faster that the external front wheel during turns
Suspension: 3-link front and triangulated 3-link rear suspension,
    aluminum panhard installs
Wheels: CR-10 beadlock style multi-spoke 1.9"
    12mm hexes
Tires: 1.9" Rockthorn 38mm soft S-Compound tires with chunky tread
    blocks, 4.3 x 1.5" (109 x 38mm)
Battery: NiMH
Battery Battery charger:
Ball Bearings: Full set
Pinion Equipment:
Stimulate Equipment:
Service warranty: Two year restricted beginning at date of purchase. Legitimate only
    in U.S.A, Canada and South America

CONSISTS OF:
Preassembled Toyota FJ Cruiser Venture Spider with Motor, ESC,
    Radio System, Trimmed & Painted Body, NiMH Battery, Battery charger, four
    AA Batteries, Guideline Mnual

REQUIRES:
Track and maintenance equipment

SPECIFICATIONS:
Automobile;
Length: 20.7" (527mm)
Width: 9" (227mm)
Height: 9.4" (238mm) with roofing rack, 8.5" (217mm) without
Wheelbase: 12.3" (311mm)
Front Overhang: 3.9" (101mm)
Rear Overhang: 5.3" (135mm)
Running Weight: 5.3lbs (2.4kg)
Weight without Body: 4.7lbs (2.1kg)
Break-over angle: 44.5°
Technique Angle: 55°
Departure Angle: 45.5°
Max Climb Angle: 49°
Max Tilt Angle: 28°
Axle Expression: 30°
Ground Clearance 2.7" (68mm)
Ground Clearance at Requirement Flight Height: 2.4" (60mm)
Axle Ground Clearance: 1.3" (32mm)
Drivetrain Ratio: 7.6:1
Transmission Gearing: 1.53:1
Axle Gearing: 3.31:1
Transfer Case Gearing: 1.5:1

    Body;
Length:
Width:
Height:

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Area Qty. Bearing Set