HPI Split Washer, 3X6mm, (20Pcs)

These are the 3x6mm Spring Washers from HPI Racing.

FEATURES:
Steel building and construction
Silver in color

INCLUDES:
Twenty 3x6mm Spring Washers

SPECIFICATIONS:
Outer Size: 6mm
Inner Size: 3mm

Often gotten with the product that you are currently reviewing.



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Load with
the Venom Universal Plug System.

FEATURES:
Wired for stabilizing
Venom Universal 4 Plug System allows connectivity between today's
    four most typical battery plugs, Tamiya, Traxxas, Deans and EC3,
    simply attach wanted plug to Venom plug on battery's wire leads

INCLUDES:
7.4V 5000mAh 40C Hardcase LiPo Battery Load with Tamiya, Traxxas,
    Deans and EC3 Plugs

NEEDS:
LiPo capable battery charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if using
    Duratrax Onyx series
LiPo Balancer such as the Group Checkpoint Pro Cars and truck balancer (TCPP9150)

SPECIFICATIONS:
Configuration: 2S
Weight: 277g (9.8oz)
Measurements: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Continuous Discharge 40C (200A)
Min Discharge Volts Per Load: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Load: 8.4V

REMARKS:
READ the ENTIRE instruction sheet included with battery prior to usage
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER permit to Discharge listed below 2.5V per cell
NEVER disassemble or customize pack circuitry in any method or puncture cells
NEVER place on flammable products or leave unattended throughout
charging
ALWAYS charge in a fireproof place
ALWAYS set battery charger's output volts to match battery volts
ALWAYS stay out of reach of children

Here is a excellent product that several others have purchased the exact same time.

Flanged Lock Nut, M4, (4Pcs), Bullet St/Mt, Rs4, Venture, Sport

These are 4mm Flanged Lock Nuts from HPI Racing.

FEATURES:
Plain black steel construction.
Nylon inserts.
Can be used for wheels, slipper clutch springs, & other applications
    which need easy elimination and will not loosen up due to vibrations.

INCLUDES:
(4) Flanged Locking Nuts

SPECIFICATIONS:
Size: 9.6mm (.38")
Thread Size: 4mm
Height: 5.7mm (.23")

This product compliments the above discussed product.

2-Speed Set Screw M3x3mm (6)

These are 3x3mm Set Screws by HPI.

FEATURES:
Plain silver metal construction.
Hexagon socket drive insert.

INCLUDES:
(6) Set Screws

SPECIFICATIONS:
Thread: 3mm (0.118")
Length: 3mm (0.118")

This product compliments the main item right here.

Set Screw M4x4mm Proceed (4)

These are 4x4mm Set Screws by HPI.

FEATURES:
Steel Set Screws

INCLUDES:
4 4x4mm Set Screws

This product compliments the main item right here.

Cap Head Screw, M2.6X14mm, Hex Socket, Bullet Mt/St (10Pcs)

This is the Button Head Screw M2.6*14mm
For the HPI Racing Bullet Series

FEATURES:
Black colored steel building and construction

INCLUDES:
Ten button head screws

REMARKS:
The HPI Racing Bullet Series consists of
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)