HPI Nitro Firestorm 10T DSX-1 RTR

This is the 1/10 scale, glow powered, radio controlled, ready-to-run
HPI Firestorm 10T Off-Road Stadium Truck.

    **The difference between this variation and the #105865**
**is that two different body color schemes;**
**Blue and Yellow, HPID65BL, or Orange and White, HPID65NL can be ordered.**

**This variation is randomly supplied with either an Orange/Black**
**or Blue/Black Painted Body.**
**It is not possible to request a particular body color.**

FUNCTIONS:
Chassis: Constructed of aluminum, 0.12" (3mm) thick
Drive Type: 2 wheel (back)
Radio: HPI TF-40 3-channel 2.4GHz with water resistant servos
    sealed detachable receiver compartment with room for a five
    cell receiver battery
Engine: HPI G3.0 with pull starter, SG (pilot) shaft with rotary carbohydrate
    double phase air filter and glow plug
Exhaust: Double chamber aluminum tuned pipe with header
Fuel Tank: 2.5oz (75cc) flip top cap
Clutch: 2 shoe with 0.8 module 19 tooth clutch bell
Transmission: Single speed with double pad slipper clutch to safeguard
    the drive train on tough landings
Ball Bearings: Full set included, 16 total
Shocks: Four silicone oil-filled, composite bodied with coil-over
    spring
Main Gear: 0.8 module 50 tooth
Gearbox: Sealed, all metal gears
Differentials: Planetary tailored, sealed and tunable
Brakes: Piston actuation, fiber disc
Tires: Front-Front Line 2.1" (53mm) wide, 2.2" (57mm) diameter
Rear-Ground Attack tapered pin 2.1" (53mm) wide, 2.2" (57mm)
    diameter
Wheels: HPI Scorch 6-spoke 2" (50mm) wide, 2.2" (57mm) diameter
    with 12mm step type aluminum hexes
Body: Trimmed and painted arena truck with customized silkscreen
    images
Suspension: Wide track type with caught hinge pins
Caster: Adjustable front and rear, caster/toe-in describes the angle
    of the front suspension when viewed from the side of the vehicle in
    relation to the chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when viewed from front or behind car
Steering: Bell crank with servo saver
Guarantee Period: 2 year restricted

INCLUDES:
HPI Firestorm 10T Stadium Truck, 2.4GHz radio, engine, glow plug
    air filter, tuned pipe, header, painted body, decals, wrench,
    8 AA batteries, tires, foam inserts, wheels, 19 tooth clutch bell,
    50 tooth spur gear, directions

REQUIRES:
Misc. Items: Structure and track equipment
Fuel: 2-cycle glow fuel with 20%-25% nitromethane, 16% lube-
    The majority of the fuels we bring fulfill or surpass the lube content
    required for maximum efficiency and maximum engine life. In the
    past, the traditional lube content used in fuel was 18%. However
    with new advanced technologies, fuels like Red Alert and O'Donnell
    for instance, have a much better quality of lubricants although the
    portions of lube content are lower. These modern
    lubricants provide exceptional cooling and protection.

SPECS:
Automobile-
Length: 16.7" (425mm)
Front Width: 12.8" (325mm)
Back Width: 12.9" (327mm)
Height: 6.6" (167mm) determined at rear wing
Weight: 4.5 pounds (2055g) approx.
Wheelbase: 11" (279mm) adjustable
Front Tread: 10.8" (274mm)
Rear Tread: 11" (279mm) wheels on-center side-to-side
Front Track: 12.75" (324mm)
Rear Track: 12.9" (329mm) outer edges of wheels
Ground Clearance: 1.4" (35mm)
Gear Ratio: 4.11:1
    Body-
Length: 16.4" (416mm)
Width: 6.6" (168mm) at rear wheels (best point)
5.7" (144mm) ahead of front wheels (thinnest point)
Height: 3.8" (97mm)

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Location Qty. Bearing Set
4 5x10mm Front Wheels 2 DTXC1535
4 5x10mm Back Wheels 2 DTXC1535
2 5x10mm Leading Shaft 1 DTXC1535
2 5x10mm Idler Shaft 1 DTXC1535
2 10x15mm Differential 1 DTXC1595
2 5x10mm Clutch 1 DTXC1535