HPI Nitro Firestorm 10T DSX-1 RTR

This is the 1/10 scale, glow powered, radio managed, ready-to-run
HPI Firestorm 10T Off-Road Stadium Truck.

    **The difference between this variation and the #105865**
**is that 2 different body color schemes;**
**Blue and Yellow, HPID65BL, or Orange and White, HPID65NL can be purchased.**

**This variation is arbitrarily supplied with either an Orange/Black**
**or Blue/Black Painted Body.**
**It is not possible to ask for a particular body color.**

FUNCTIONS:
Chassis: Constructed of aluminum, 0.12" (3mm) thick
Drive Type: Two wheel (back)
Radio: HPI TF-40 3-channel 2.4GHz with waterproof servos
    sealed detachable receiver compartment with space for a five
    cell receiver battery
Engine: HPI G3.0 with pull starter, SG (pilot) shaft with rotary carbohydrate
    dual phase air filter and glow plug
Exhaust: Double chamber aluminum tuned pipeline with header
Fuel Tank: 2.5oz (75cc) flip leading cap
Clutch: Two shoe with 0.8 module 19 tooth clutch bell
Transmission: Single speed with dual pad slipper clutch to secure
    the drive train on hard landings
Ball Bearings: Full set included, 16 total
Shocks: Four silicone oil-filled, composite bodied with coil-over
    spring
Main Gear: 0.8 module 50 tooth
Gearbox: Sealed, all metal equipments
Differentials: Planetary geared, sealed and tunable
Brakes: Piston actuation, fiber disc
Tires: Front-Front Line 2.1" (53mm) wide, 2.2" (57mm) diameter
Rear-Ground Attack tapered pin 2.1" (53mm) wide, 2.2" (57mm)
    diameter
Wheels: HPI Scorch 6-spoke 2" (50mm) wide, 2.2" (57mm) diameter
    with 12mm step type aluminum hexes
Body: Cut and painted arena truck with custom-made silkscreen
    images
Suspension: Wide track type with captured hinge pins
Caster: Adjustable front and rear, caster/toe-in refers to the angle
    of the front suspension when seen from the side of the car in
    relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind lorry
Steering: Bell crank with servo saver
Service warranty Period: Two year limited

INCLUDES:
HPI Firestorm 10T Stadium Truck, 2.4GHz radio, engine, glow plug
    air filter, tuned pipeline, header, painted body, decals, wrench,
    8 AA batteries, tires, foam inserts, wheels, 19 tooth clutch bell,
    50 tooth spur gear, guidelines

REQUIRES:
Misc. Products: Structure and track equipment
Fuel: 2-cycle glow fuel with 20%-25% nitromethane, 16% lubricant-
    The majority of the fuels we bring fulfill or exceed the lubricant material
    needed for optimal efficiency and optimum engine life. In the
    past, the standard lubricant material used in fuel was 18%. However
    with brand-new advanced innovations, fuels like Red Alert and O'Donnell
    for example, have a better quality of lubricants although the
    percentages of lubricant material are lower. These state-of-the-art
    lubricants supply exceptional cooling and protection.

SPECS:
Car-
Length: 16.7" (425mm)
Front Width: 12.8" (325mm)
Back Width: 12.9" (327mm)
Height: 6.6" (167mm) determined at rear wing
Weight: 4.5 pounds (2055g) approx.
Wheelbase: 11" (279mm) adjustable
Front Tread: 10.8" (274mm)
Rear Tread: 11" (279mm) wheels on-center side-to-side
Front Track: 12.75" (324mm)
Rear Track: 12.9" (329mm) external edges of wheels
Ground Clearance: 1.4" (35mm)
Gear Ratio: 4.11:1
    Body-
Length: 16.4" (416mm)
Width: 6.6" (168mm) at rear wheels (widest point)
5.7" (144mm) ahead of front wheels (thinnest point)
Height: 3.8" (97mm)

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set
4 5x10mm Front Wheels 2 DTXC1535
4 5x10mm Back Wheels 2 DTXC1535
2 5x10mm Top Shaft 1 DTXC1535
2 5x10mm Idler Shaft 1 DTXC1535
2 10x15mm Differential 1 DTXC1595
2 5x10mm Clutch 1 DTXC1535