HPI Baja 5B SS Kit

This is the 1/5 scale, gas powered, radio managed,
HPI Baja 5B SS Buggy kit.

**New factory high performance alternatives for 2014 include;**
#87288 Steel Exhaust Header, HPIG8611
#15448 8000RPM High Reaction Clutch, HPIC1548
#87568 Aluminum Alloy Diff Case
#104966 Super Sturdy Dogbones, HPIC4966
#112845 Super Sturdy Front Centers
#104781 One-Piece Rear Uprights, HPIC4781

FEATURES:
Chassis: Narrow channel monocoque design 0.16" (4mm) thick, gun-metal
    gray in color, constructed of airplane grade 6061 T6 aluminum,
    side guards safeguard engine from dirt and particles
Drive: Rear wheel equipment drive with strong dogbones
Engine: Fuelie 26S gas engine with pull starter,
    fast release foam air filter, guide, choke and eliminate switch
Steering servo: SFL-11MG Servo, metal gear/24.7kg-cm6.0Vg (HPIM2772)
Ball Bearings: Complete set consisted of
Shocks: 4 VVC strong aluminum shocks with 5 externally
    adjustable moistening settings and dual rate springs for
    progressive moistening action on all surface areas, customized rear shock
    tower brace
Main Gear: 57 tooth composite construction
Transmission: Sealed, strong metal gears
Differential: Thick Torque Control can be tuned using various
    weight diff oils, hardened metal planetary gears, aluminum alloy
    diff case
Brakes: Aerated dual disc
Clutch: 2-shoe, 8000 RPM
Gas Tank: 25.3 oz (750cc)
Front Tires: HPI Dirt Buster Rib Pattern M compound 2.4" (60mm) wide
    6.7" (170mm) outer size
Rear Tires: HPI Dirt Buster Block Pattern S compound 3.1" (80mm)
    wide, 6.7" (170mm) outer size
Wheels: Black 5-spoke, nylon 3-piece bead lock, bead is bolted to
    wheel to hold tire safely in place-no requirement for tire glue
Body: Clear pre-cut
Rear Wing: Molded black plastic with decals applied
Roll Cage: Baja style high impact nylon secures engine and body
    from crash damage
Suspension: Fully adjustable, long travel double wishbone
Caster: Adjustable, with shims 22 / 25.5* stock / 29 degrees
    caster/toe-in refers to the angle of the front
    suspension when seen from the side of the automobile in relation to the
    chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind lorry
Guarantee: 2-year restricted, valid just in USA, Canada and South America
Baja light sets are readily available - HPIC0336 (white) HPIC0337 (blue)

INCLUDES:
HPI Baja 5B SS kit, engine, guiding servo, 2oz (60cc) shock oil,
    1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of equipment grease
    body, with wing, additional air filter, wrenches, decal sheet and
    detailed user's manual, 3.4oz (100cc) Z191 2-cycle oil

NEEDS:
Radio: 2-3 ch FM or 2.4GHz with standard size servo for throttle
    (do not use AM radio)
Receiver Battery: 6V hump setup, at least 3000mAh
Battery Charger: Timed or peak for receiver pack
Unleaded Gasoline: 87-93 octane, mix gas and two cycle oil
    at 25:1 ratio,
Transmitter Batteries: AA, number depends upon chosen transmitter
Paint: Spray or brush-on for polycarbonate bodies
Building and track equipment

SPECS:
Lorry-
Length: 32.2" (817mm)
Front Width: 18.1" (460mm)
Rear Width: 18.9" (480mm)
Height: 10" (255mm) with 1G, 11" (280mm) with 0G
Flight Height: 3" (76mm)
Suspension Travel: Front 3.7" (95mm), Rear 3.9" (100mm)
Weight: 21.3 lbs (9.6kg) without fuel
Wheelbase: 22.4" (570mm) wheels on-center front-to-rear
_ Front Track: 15.5" (395mm)
Rear Track: 15.7" (400mm) outer edges of wheels
Gear Ratio: 8.382:1
Tires- Front: 2.4" (60mm) x 6.7" (170mm)
Rear: 3.1" (80mm) x 6.7" (170mm)
    Body-
Length: 22.9" (581mm)
Width: 8.8" (224mm) at rear wheels (best point)
3.25" (82mm) ahead of front wheels (thinnest point)
Height: 4.75" (121mm) at highest point

REMARKS:
For Replacement Ball Bearings usage:
    Qty. Size Location Qty Bearing Set
4 12x24mm Fr Wheel Centers 2 HPIC0089
4 12x24mm R Wheel Centers 2 HPIC0089
2 10x15mm Steering Shafts 1 DTXC1595
2 17x30mm Idler Gear 1 HPIC0092
2 12x24mm Drive Gear 1 HPIC0089
1 12x24mm Spur Gear Mount 1 HPIC0089
2 10x15mm Diff 1 DTXC1595