HPI Baja 5B SS Kit

This is the 1/5 scale, gas powered, radio managed,
HPI Baja 5B SS Buggy set.

**New factory high efficiency alternatives for 2014 include;**
#87288 Steel Exhaust Header, HPIG8611
#15448 8000RPM High Action Clutch, HPIC1548
#87568 Aluminum Alloy Diff Case
#104966 Super Heavy Duty Dogbones, HPIC4966
#112845 Super Heavy Duty Front Centers
#104781 One-Piece Back Uprights, HPIC4781

FUNCTIONS:
Chassis: Narrow channel monocoque style 0.16" (4mm) thick, gun-metal
    gray in color, built of aircraft grade 6061 T6 aluminum,
    side guards safeguard engine from dirt and debris
Drive: Rear wheel equipment drive with strong dogbones
Engine: Fuelie 26S gas engine with pull starter,
    quick release foam air filter, primer, choke and kill switch
Steering servo: SFL-11MG Servo, metal gear/24.7kg-cm6.0Vg (HPIM2772)
Ball Bearings: Complete set consisted of
Shocks: Four VVC strong aluminum shocks with 5 externally
    adjustable moistening settings and dual rate springs for
    progressive moistening action on all surface areas, modified rear shock
    tower brace
Main Equipment: 57 tooth composite construction
Transmission: Sealed, strong metal gears
Differential: Viscous Torque Control can be tuned using various
    weight diff oils, hardened metal planetary gears, aluminum alloy
    diff case
Brakes: Aerated dual disc
Clutch: 2-shoe, 8000 RPM
Gas Tank: 25.3 oz (750cc)
Front Tires: HPI Dirt Buster Rib Pattern M substance 2.4" (60mm) wide
    6.7" (170mm) external diameter
Rear Tires: HPI Dirt Buster Block Pattern S substance 3.1" (80mm)
    wide, 6.7" (170mm) external diameter
Wheels: Black 5-spoke, nylon 3-piece bead lock, bead is bolted to
    wheel to hold tire firmly in place-no need for tire glue
Body: Clear pre-cut
Rear Wing: Molded black plastic with decals applied
Roll Cage: Baja style high impact nylon protects engine and body
    from crash damage
Suspension: Completely adjustable, long travel double wishbone
Caster: Adjustable, with shims 22 / 25.5* stock / 29 degrees
    caster/toe-in describes the angle of the front
    suspension when viewed from the side of the vehicle in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when viewed from front or behind lorry
Service warranty: 2-year limited, legitimate just in USA, Canada and South America
Baja light sets are offered - HPIC0336 (white) HPIC0337 (blue)

INCLUDES:
HPI Baja 5B SS set, engine, steering servo, 2oz (60cc) shock oil,
    1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of equipment grease
    body, with wing, extra air filter, wrenches, decal sheet and
    detailed instruction manual, 3.4oz (100cc) Z191 2-cycle oil

REQUIRES:
Radio: 2-3 ch FM or 2.4GHz with basic size servo for throttle
    (do not use AM radio)
Receiver Battery: 6V bulge configuration, a minimum of 3000mAh
Battery Charger: Timed or peak for receiver pack
Unleaded Gas: 87-93 octane, mix gas and 2 cycle oil
    at 25:1 ratio,
Transmitter Batteries: AA, number depends upon picked transmitter
Paint: Spray or brush-on for polycarbonate bodies
Structure and track devices

SPECS:
Lorry-
Length: 32.2" (817mm)
Front Width: 18.1" (460mm)
Rear Width: 18.9" (480mm)
Height: 10" (255mm) with 1G, 11" (280mm) with 0G
Ride Height: 3" (76mm)
Suspension Travel: Front 3.7" (95mm), Rear 3.9" (100mm)
Weight: 21.3 pounds (9.6kg) without fuel
Wheelbase: 22.4" (570mm) wheels on-center front-to-rear
_ Front Track: 15.5" (395mm)
Rear Track: 15.7" (400mm) external edges of wheels
Equipment Ratio: 8.382:1
Tires- Front: 2.4" (60mm) x 6.7" (170mm)
Back: 3.1" (80mm) x 6.7" (170mm)
    Body-
Length: 22.9" (581mm)
Width: 8.8" (224mm) at rear wheels (best point)
3.25" (82mm) ahead of front wheels (thinnest point)
Height: 4.75" (121mm) at acme

REMARKS:
For Replacement Ball Bearings usage:
    Qty. Size Area Qty Bearing Set
4 12x24mm Fr Wheel Centers 2 HPIC0089
4 12x24mm R Wheel Centers 2 HPIC0089
2 10x15mm Steering Shafts 1 DTXC1595
2 17x30mm Idler Equipment 1 HPIC0092
2 12x24mm Drive Equipment 1 HPIC0089
1 12x24mm Spur Equipment Mount 1 HPIC0089
2 10x15mm Diff 1 DTXC1595