HPI 1/10 Venture Toyota FJ Cruiser Gunmetal 4WD RTR

**Additional Technical Info Will Be Added When It Becomes Available.**

This is the 1/10 scale Electric Powered, 2.4GHz Radio Controlled
All set to Run Toyota FJ Cruiser Endeavor Spider in Gunmetal Gray from HPI.

FEATURES:
Chassis: Steel C-channel chassis rails and cross braces, adjustable
    side sliders
Drive: Four wheel with main transfer case, telescoping driveshafts
    and strong axles with metal diff covers
Differentials: Full-time locked, aluminum pumpkin size cover for best
    ground clearance
Transfer Case: Straightens and reduces center drive shafts for
    efficient power transfer, avoids motor stall for best climbing
    action
Motor: Front installed 35 turn spider spec
ESC: HPI water resistant SC-3sWP2 Spider Edition
Battery Box:
Radio: HPI TF-40 2.4GHz 3-channel system with water resistant receiver,
    and HPI water-resistant SS-20WR guiding servo
Body: Trimmed and painted officially licensed Toyota FJ Cruiser with
    practical roof rack, mirrors, front bumper with brush guard,
    light mounts and D-ring shackles, rear bumper with swing away
    spare tire install and D-ring shackles, adjustable body mounts for
    any design off-road body, complete braced rear mounts
Shocks: Oil-filled, aluminum body, double phase springs
Shock Towers: Composite plastic
Steering: BTA (Behind the Axle) linkage for better technique and
    departure angles, CMS (Chassis Installed Servo) sensible setup
    Absolutely no Ackermann high steer knuckle style for better clearance and
    tighter turning radius, Ackermann describes the effect of the inner
    front wheel turning much faster that the external front wheel during turns
Suspension: 3-link front and triangulated 3-link rear suspension,
    aluminum panhard mounts
Wheels: CR-10 beadlock design multi-spoke 1.9"
    12mm hexes
Tires: 1.9" Rockthorn 38mm soft S-Compound tires with chunky tread
    blocks, 4.3 x 1.5" (109 x 38mm)
Battery: NiMH
Battery Battery charger:
Ball Bearings: Full set
Pinion Gear:
Stimulate Gear:
Warranty: Two year limited beginning at date of purchase. Valid just
    in U.S.A, Canada and South America

CONSISTS OF:
Preassembled Toyota FJ Cruiser Endeavor Spider with Motor, ESC,
    Radio System, Trimmed & Painted Body, NiMH Battery, Battery charger, four
    AA Batteries, Guideline Mnual

NEEDS:
Track and maintenance equipment

SPECIFICATIONS:
Vehicle;
Length: 20.7" (527mm)
Width: 9" (227mm)
Height: 9.4" (238mm) with roof rack, 8.5" (217mm) without
Wheelbase: 12.3" (311mm)
Front Overhang: 3.9" (101mm)
Rear Overhang: 5.3" (135mm)
Running Weight: 5.3lbs (2.4kg)
Weight without Body: 4.7lbs (2.1kg)
Break-over angle: 44.5°
Technique Angle: 55°
Departure Angle: 45.5°
Max Climb Angle: 49°
Max Tilt Angle: 28°
Axle Expression: 30°
Ground Clearance 2.7" (68mm)
Ground Clearance at Requirement Trip Height: 2.4" (60mm)
Axle Ground Clearance: 1.3" (32mm)
Drivetrain Ratio: 7.6:1
Transmission Gearing: 1.53:1
Axle Gearing: 3.31:1
Transfer Case Gearing: 1.5:1

    Body;
Length:
Width:
Height:

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set