Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to supply the supreme in fuel filtration.
Can be utilized with fuel or radiance fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECIFICATIONS:
Length: 1"

Regularly bought with the item that you are presently checking out.



This is a 12.5x6 airplane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design gives these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon construction reduces rotating mass
    for higher output and longer life.
Reinforcing carbon fibers assist maintain real, consistent pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

REQUIRES:
ALL props require balancing, this is CRUCIAL, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 12.5" Pitch: 6
Thickness at center: 1/2" Hole diameter: 1/4"

Want one more terrific item to enhance the above pointed out item?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Perfect for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Fit for the different throttle range of off-road racing
Medium heat range

CONSISTS OF:
One Traxxas Medium Heat Variety Super Task Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro material

Want one more terrific item to enhance the above pointed out item?

Air Filter Stampede

This is the Replacement Air Filter Component for the Traxxas Nitro Stampede.
    This element lies in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Diameter: 30mm (1.18")
Height: 17.5mm (0.69")

COMMENTS:
For the total air filter with rubber body, usage TRAC4060.
The rubber filter body is not readily available separately.

Below is a terrific item that numerous others have purchased the exact same time.

Universal Servo Grease

This is for usage with all producers' servo gear sets.
To usage, just dismantle servo, throughly clean all old grease off gears, and
utilize brand-new grease sparingly throughout reassembly.
The grease (.1 oz) can be found in a small toothpaste-like metal tube.

DEE
8.Oct.97

Below is a terrific item that numerous others have purchased the exact same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This permits you to extend the distance between your
    receiver and servo.

INCLUDES:
(1) Extension

REQUIRES:
Setup

SPECIFICATIONS:
Length: 6" (152mm)

COMMENTS:
Wire color code: Hitec-
Black: negative
Red: favorable
Yellow: signal

This item is regularly bought with the above pointed out item.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part connects inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to remove and clean filtering mesh

CONSISTS OF:
One assembled fuel filter

REQUIRES:
Setting up with basic fuel tubing connected to each end.

SPECS:
Length: 29mm (1.15")
External diameter: 10.5mm (0.41")

COMMENTS:
The length of the filter is determined from tip to tip, not the primary
    body of the filter.