Dubro 3" Super Lite Wheels

These are 3" Super Lite Wheels from Dubro.

FEATURES:
Black impact-absorbing foam building and construction pre-mounted on
gray plastic 7 spoke rims.
Rib tread design.

INCLUDES:
Two 3" Super Lite Pre-mounted Wheels

NEEDS:
Wheel collars to hold them on the axle.
May require reaming out the hole to mount on bigger axle.

SPECS:
Diameter: 3" OD
Diameter: .178" axle hole
Weight: 13.84 gr

Want an additional fantastic product to enhance the above stated product?

11x8 Thin Electric Prop

This is an 11x8E Thin Composite propeller from Advanced Accuracy Composites.
For utilize on Electric powered airplane just (not for radiance engines).

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adjuster rings that adapt to various motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

NEEDS:
ALL props require balancing, this is CRUCIAL, utilize TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 11" (279mm)
Pitch: 8
Hub inner size: 0.25" (6.3mm)

This product is frequently gotten with the above stated product.



MonoKote is a Patented, Flexible High-Gloss Polyester Movie that is Economical,
Easy, Clean, and When Compared with "old fashioned" Coverings, Quick To Use.

For fantastic covering concepts and to guarantee an expert surface, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only .2 oz/sq ft
Dry Adhesive is Triggered When Heat is Applied
Shrinks to a Drum-Tight Complete As It Cools
High Gloss Complete
Fuelproof and Water resistant
Stronger and Lighter Than Conventional Silk and Dope Coverings
Might be Cleaned up with Glass Cleaner, "409" or MonoKote Cleaner/Polish

CONSISTS OF:
One (6' x 26") Roll of Aluminum Covering
One Instruction Sheet

NEEDS:
Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

REMARKS:
Paints, Trim Sheets, EconoKote and Various Great deals of MonoKote Might
    Vary A little In Color In between Production Runs of These Products.
If Using 3 or More Rolls of the Very same Color, it is Suggested to
    Utilize a 25' Roll (TOPQ1205) To Ensure the Very same Dye Lot for the Entire
    Design Being Covered.
LustreKote Primer Should Be Used With LustreKote Paint to Draw out Its
    Real Color.
MonoKote Trim Sheet: TOPQ4105

MonoKote is a High Temperature Covering, NOT For Usage Directly On Foam
EconoKote IS For Usage Directly On Foam
    (EconoKote may be used on top of, but not under MonoKote.)
Temperature Varies:
    Attaching to Wood: 215 - 240°F (triggering the glue)
    Partial Shrinking: 230 - 270°F
    Maximum Shrinking: 270 - 350°F

This product is frequently gotten with the above stated product.

3/32" Nickel Plated Dura Collars

These are 3/32" Nickel Plated Brass Dura-Collars.

FUNCTIONS:
Nickel plated brass construction.

INCLUDES:
Four collars
Four 4-40 x1/8" set screws
One .050" allen wrench

NEEDS:
Installation.

SPECS:
Length: .189"
Diameter: 3/32" ID .248 OD