APC 11x8 Thin Electric Prop

This is an 11x8E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane only (not for radiance engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adapter rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props require balancing, this is VERY important, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 11" (279mm)
Pitch: 8
Center inner size: 0.25" (6.3mm)

Below is a great thing that numerous others have actually bought at the same time.

11x7 Thin Electric Prop

This is a 11x7E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane only (not for radiance engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adapter rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props require balancing, this is VERY important, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5006 (Metric)

SPECIFICATIONS:
Diameter: 11"
Pitch: 7
Center inner size: 0.25"

Regularly bought with the thing that you are currently reviewing.

Prop Adapter with Collet, 5mm




Below is a great thing that numerous others have actually bought at the same time.



Designed for usage with 3 wire Brushless motor systems, this is
    the 3.5mm Gold Bullet Adapter Male from Great Planes.

FEATURES:
Gold plated

INCLUDES:
Three male bullet ports

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .47" (12mm)
Diameter: .14" (3.5mm) outside

COMMENTS:
For the 3.5mm female adapter order GPMM3113

Below is one more thing that compliments the thing being gone over.



These are Female 2-Pin Flat Red Connectors with 3" wires.
This is likewise referred to as a JST connector.

FEATURES:
Designed for usage with a lot of Park Flyer ElectriFly electronics
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality guarantee

INCLUDES:
2 Female 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to connect wires to application

SPECIFICATIONS:
Plug Size-
    Length: 19mm (general)
    Width: 7mm
    Height: 4mm

COMMENTS:
For the male ports with wire, usage GPMM3106.
This adapter can be used to replace BEC-type ports.

The below thing likewise pairs actually well with the thing being gone over.

11X8 Electric Pusher

This is a 11x8 Electric Pusher Propeller
from Advanced Precision Composites.
For use on electrical powered airplane only, not for radiance powered engines.

FEATURES:
Constructed of Gray composite product
5 adapter rings that adapt to various motor shafts

INCLUDES:
11x8EP Thin Electric Pusher Propeller, 2 adapter rings and
    direction sheet

REQUIRES:
Assembly onto motor shaft or equipment drive device in electrical airplane

SPECIFICATIONS:
Diameter: 11"
Pitch: 8
Center inner size: 0.375" (9.5mm) where rings are installed
Inner Diameter of Rings: 0.128" (3.25mm), 0.158" (4mm), 0.197" (5mm)
0.237" (6mm) and 0.313" (7.95mm)