Dubro 2" Spinner (2 Blade) White

This is the DuBro White 2" Nylon Spinner for 2 Blade Props

FUNCTIONS:
Red nylon construction
Interchangeable nylon adapters for use on different size prop shafts

CONSISTS OF:
One 2" spinner
One spinner backplate
2 4-40 nylon lock nuts
2 4-40 x 1/2" cap head screws
Five nylon adapers for the following crankshaft sizes:
5/16", 9/32", 1/4", 7/32", 3/16"
Directions on header card

NEEDS:
A 3/32" hex wrench for cap head screws

SPECS:
Length: 2-1/8"
Size: 2" OD of spinner at rear
3/8" crankshaft hole (adjustable with consisted of adapters)

REMARKS:
Caution must be utilized when mounting the spinner. Failure to follow
the consisted of instructions thoroughly might result in injury.

updt complete id tjt 072705

This product is frequently acquired with the above mentioned product.

11x8 Thin Electric Prop

This is an 11x8E Thin Composite prop from Advanced Accuracy Composites.
For utilize on Electric powered airplane only (not for glow engines).

FUNCTIONS:
Gray composite prop blades that put together onto a prop hub.
Comes with five adjuster rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite prop
Five composite adapter rings

NEEDS:
ALL props need balancing, this is CRUCIAL, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 11" (279mm)
Pitch: 8
Hub inner diameter: 0.25" (6.3mm)