Dubro 3X8mm Flat Head Socket Screws (4)

These are Countersunk Machine Screws by Dubro.

FEATURES:
Black metal building and construction

INCLUDES:
4 hex head 3.0x8mm screws

NEEDS:
2mm hex wrench, GPMR8011

Numerous others have actually bought this product in addition to the product that you are currently reading about.

Flat Head Socket Screw 3.0mmx6 (4)

This is a plan of 4 Dubro Flat Head Hex Screws for general application.

FEATURES:
Black steel building and construction

INCLUDES:
4 3x6mm flat head hex screws

NEEDS:
Tightening with a 2.0mm allen secret

Below is a terrific product that several others have actually bought at the same time.

3.0Mmx10 Flat Head Socket Screws, 4/Pkg

These are Countersunk Machine Hex Head Screws by Dubro.

FEATURES:
Black metal building and construction

INCLUDES:
4 3.0x10mm screws

NEEDS:
2mm hex wrench, GPMR8011

You will like this product if you have the product previously discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This product praises the above discussed product.

3.0Mm X 10 Socket Head Cap Screws (4/Pkg)

These are 3x10mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

INCLUDES:
4 screws

NEEDS:
2.5mm allen wrench

SPECS:
Length: 10mm
Diameter: 3mm

This product praises the above discussed product.

3.0Mm X 18 Socket Head Cap Screws (4/Pkg)

These are 3x18mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

INCLUDES:
4 screws

NEEDS:
2.5mm allen wrench

SPECS:
Length: 18mm
Diameter: 3mm

This is a great addition to the product currently being discussed.

3.0Mm X 30 Socket Head Cap Screws (4/Pkg)

These are 3x30mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

INCLUDES:
4 screws

NEEDS:
2.5mm allen wrench

SPECS:
Length: 30mm
Diameter: 3mm

Below is another product that praises the product being discussed.

3Mm Nylon Insert Lock Nuts Metric

These are 3mm Nylon Insert Lock Nuts from Du-Bro's Automobile Line (Metric).

FUNCTIONS:
Zinc plated metal construction.
Clear nylon insert.
Aircraft quality lock nuts.

INCLUDES:
(4) Lock Nuts

SPECS:
Diameter: 3mm

Want another terrific product to compliment the above discussed product?



This is a 6x5.5E Thin Composite Propeller from Advanced Precision Composites.
For use on Electric powered airplane just (not for glow engines).

FUNCTIONS:
Gray composite building and construction

INCLUDES:
One 6x5.5E Thin Electric Propeller

NEEDS:
ALL props require balancing, this is VERY important, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 6"
Pitch: 5.5
Center inner size: 0.25"

Frequently bought with the product that you are currently reading about.



These are the 4x3x6mm Grey Spacers from Axial
for the Scorpion Rock Crawler.

FEATURES:
Aluminum building and construction, grey in color

INCLUDES:
Six 4x3x6mm spacers

NEEDS:
Setup

SPECS:
Length: .16" (4mm)
Outer size: .23" (6mm)
Inner size: .11" (3mm)

Get this product to boost the one you read about.

1400Kv Brushless Outrunner, Long Shaft

PLEASE KEEP IN MIND: Prop adapter not included.

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or little Multi-Rotor frames with Hobbywing 6A esc.

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or little Multi-Rotor frames with Hobbywing 6A esc.

An exceptional motor for airplanes as much as 220 grams (8 oz) utilizing 2 li-poly cells. Really light-weight at 19 grams including integral prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and integral firewall software mount. Great for little 3D airplanes weighing around 6 oz, or aerobatic airplanes as much as 8 oz. Use with a 10 Amp brushless ESC and little 7.4V lithium batteries in the 400mah - 800mah range.

The motor features a 3mm solidified steel shaft, double ball bearings, integral prop saver for APC E props and integral firewall software mount flange. Keep in mind that the prop saver is sized for APC props. GWS props will need some modification to fit properly. Countersunk installing holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. efficiency current: 2-6 Amp
NoLoad current / 0.3 Amp
Present capability: 7.5 A/60 s
Max. Performance: 74%
Weight with cable televisions: 19g
Dimensions (mm): 27.6x11.5

Recomended model weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5