Dubro 1 1/2" (38Mmm) Mini Lite Wheels

This is a Set of 2 Dubro Mini Lite 1-1/2" Size Wheels.

FEATURES:
Lightweight Foam contruction
Pre-mounted on Grey plastic wheels

INCLUDES:
2 Mini Lite Wheels

NEEDS:
Assembly on vehicle

SPECS:
Tire Size: 38.11mm (1-1/2")
Tire Width: 11mm (.443")

Often acquired with the thing that you are presently reading about.

Mini Lite 1" Airplane Wheels

This is a Set of 2 Dubro Mini Lite 1" Size Wheels.

FEATURES:
MW Series foam wheels, Scale looking and best for Park Flyers
Foam pre-mounted onto gray Plastic Wheels
.047 Axle Size and Can be Drilled out to a larger Diameter.
Super Lightweight at .90g per each wheel

SPECS:
Tire Size: 1" (25mm)
Tire Width: .28" (7mm)

INCLUDES:
2 Mini Lite 1" Wheels

Want an additional wonderful thing to compliment the above pointed out thing?

1.86" Micro Sport Wheels

This is a set of 2 Du-Bro 1.86" Micro Sport Wheels.

FEATURES:
Lightweight foam construction
Pre-mounted on 5-spoke white plastic wheels

INCLUDES:
2 1.86" (47mm) Micro Sport Wheels

NEEDS:
Assembly on vehicle.

SPECS:
Tire Size: 47mm (1.85")
Tire Width: 8mm (.31")
Hole Size: 2mm

Want an additional wonderful thing to compliment the above pointed out thing?



This is the EMS Sturdy 24" Servo Extension with
JR/Airtronics Z/Hitec Connectors.

FEATURES:
Strong extension

INCLUDES:
Sturdy 24" Servo Extension with JR/Airtronics Z/Hitec Connectors

SPECS:
Length: 24" (610mm)
Connectors: One male and one woman

Right here is a wonderful thing that many others have actually purchased the same time.

Prop Saver Rubberbands/O-Rings (4)

These are the Prop Saver Rubber Bands for the Great Planes Yak 55 EP ARF

FUNCTIONS:
Wraps around the Prop to hold it on and secure it during crashes

INCLUDES:
(4) Rubber Bands

Right here is a wonderful thing that many others have actually purchased the same time.



This is the Precision Z-Bend Pliers with Navigator Alignment Pin
from Great Planes.

FEATURES:
Heavy-duty, all metal construction (Black in color).
Rubber convenience grip minimizes hand fatigue (Red in color).
Alignment pin puts the Z-bend precisely where you desire it - everytime.
    (see REMARKS) Makes Z-bends in line with the pushrod even in
    limited area installations.
Makes 90° Z-bends in wire as much as 1/16" in diameter.
One year quality guarantee.

INCLUDES:
One set of Precision Z-Bend Pliers with Navigator Alignment Pin

NEEDS:
Pliers are complete.

SPECS:
Length: 9"

REMARKS:
The alignment pin is on the top of the pliers, and is associated
    the area on the pliers jaws that make the bend. Basically the
    pin in the servo horn hole that the pushrod will connect to.
    Next, lightly hold the music wire where the bend will be put.
    Then remove the pliers from the servo horn, and squeeze the manages
    together to make the bend. You can remove any excess wire with a
    pair of diagonal wire cutters.

This thing is often acquired with the above pointed out thing.



The Pro 6 minute epoxy treatments quickly while also supplying unbelievable bonding
strength.

INCLUDES:
One 4.5oz bottle of resin (Clear)
One 4.5oz bottle of hardener (Yellowish)

NEEDS:
Epoxy blending cups GPMR8056, blending brushes GPMR8060 or epoxy blending
    sticks GPMR8055.