Dubro 1.86" Micro Sport Wheels

This is a set of Two Du-Bro 1.86" Micro Sport Wheels.

FEATURES:
Lightweight foam building and construction
Pre-mounted on 5-spoke white plastic wheels

CONSISTS OF:
Two 1.86" (47mm) Micro Sport Wheels

NEEDS:
Assembly on vehicle.

SPECS:
Tire Size: 47mm (1.85")
Tire Width: 8mm (.31")
Hole Size: 2mm

Frequently acquired with the item that you are presently checking out.

2.50" Micro Sport Wheels, 2/Pkg

This is a pair of 2.5" Size Micro Sport Wheels from Du-Bro.

FUNCTIONS:
Created for indoor and park flyer designs
White Nylon, Open 5-spoke design includes a stylish aim to your model
Pre-mounted smooth foam tires

CONSISTS OF:
Two 2.5" Size Micro Sport Wheels

NEEDS:
Setup

SPECIFICATIONS:
Size: 2.5" (63mm)
Width: .40" (10mm)
Axle Hole Size: .078" (2mm)
Weight: 6.9 grams (each wheel)

This item compliments the main item below.



Created for usage with 3 wire Brushless motor systems, this is
    the 2mm Gold Bullet Adapter Male from Great Planes.

FEATURES:
Gold plated

CONSISTS OF:
3 male bullet connectors

NEEDS:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .59" (15mm)
Size: .079" (2mm) outside

REMARKS:
For the 2mm female adapter order GPMM3111

The listed below item likewise sets truly well with the item being gone over.

Gold Plated Bullet Connector Female 3.5mm (3)

Created for usage with 3 wire Brushless motor systems, this is
the 3.5mm Gold Bullet Adapter Female from Excellent Planes.

FEATURES:
Gold plated
Fits wire diameter up to 3.5mm

CONSISTS OF:
3 female bullet connectors

NEEDS:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .51" (13mm)
Size: .14" (3.5mm) inside (where the wire is soldered to)
Size: .17" (4.25mm) outside

REMARKS:
For the 3.5mm male adapter order GPMM3112

Get this item to boost the one you read about.



These are Female 2-Pin Flat Red Connectors with 3" wires.
This is also understood as a JST connector.

FEATURES:
Created for usage with a lot of Park Flyer ElectriFly electronics
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality warranty

CONSISTS OF:
Two Female 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to connect wires to application

SPECIFICATIONS:
Plug Size-
    Length: 19mm (general)
    Width: 7mm
    Height: 4mm

REMARKS:
For the male connectors with wire, usage GPMM3106.
This adapter can be used to replace BEC-type connectors.

The listed below item likewise sets truly well with the item being gone over.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building and construction

CONSISTS OF:
Two control horns w/4 changing holes and 2 installing holes
(3/4" long [tall])
Two installing plates w/2 installing holes (3/8"x3/8")
4 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "consists of" above

This is a superb enhancement to the item presently being gone over.

EC3 Device Connector (2)

Specs
Battery/Charger Accessories: Adapters
Connector Type: EC3

Frequently acquired with the item that you are presently checking out.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Equipment Type : All Nylon Equipment
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Measurement : 23mm x 12mm x 29mm
Adapter Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging material:
1 x 9g TITAN Servo Sets (with accessories)