Dromida Main Motor Clock-wise Left/Front Right/Rear Ominus/FPV

This is the Left Front/Right Back Clockwise Rotating Motor
for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Replacement Left Front/Right Back Clockwise Rotating Motor with
Pinion Equipment and Wire Lead with Connector

CONSISTS OF:
Left Front/Right Back Clockwise Rotating Motor, essential #9

REMARKS:
Not interchangeable with other positions. For the Right Front/
Left Back Counterclockwise Rotating Motor, order DIDE1131

Here is a excellent item that many others have actually purchased the exact same time.



This is the Right Front/Left Back Counterclockwise Rotating Motor
for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Replacement Right Front/Left Back Counterclockwise Rotating Motor
with Pinion Equipment and Wire Lead with Connector

CONSISTS OF:
Right Front/Left Back Counterclockwise Rotating Motor, essential #10

REMARKS:
Not interchangeable with other positions. For the Left Front/
Right Back Clockwise Rotating Motor, order DIDE1130.

Here is a excellent item that many others have actually purchased the exact same time.

Main Gear Shaft Ominus Quadcopter

These are the Main Equipment Shafts for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Aluminum construction
Transfers power from the motor to the main equipment set and propellers
    housed in the main frame

CONSISTS OF:
4 Main Equipment Shafts, essential #5

This item is regularly acquired with the above stated item.



This is the Equipment Set for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Plastic construction
Installs in main frame and connects to propellers and main equipment
    shafts

CONSISTS OF:
4 Gears, essential #4

This item is regularly acquired with the above stated item.

Motor Covers Ominus FPV

These are the Motor Covers for the Dromida Ominus Quadcopter FPV, DIDE02**.

FUNCTIONS:
Plastic construction
Attaches to main frame and holds motors in place

CONSISTS OF:
4 Motor Covers, essential #10

This item praises the above talked about item.

Motor Cover Ominus Quadcopter

These are the Motor Covers for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Plastic construction
Holds motor in place on bottom of main frame

CONSISTS OF:
4 Motor Covers essential #8

You will certainly enjoy this item if you have the item above discussed.



This is the 3.7V LiPo Battery for the Ominus Quadcopter from Dromida.
**Will NOT work in the Ominus FPV.**

FUNCTIONS:
Stock replacement battery for the Dromida Ominus, DIDE01**

CONSISTS OF:
3.7V LiPo Battery with Wire Lead and 2-Pin Connector

NEEDS:
USB Charger, DIDP1120

SPECS:
Voltage Score: 3.7V
mAh Score: 700
Discharge Rate: 25C
Power Score: 2.6Wh

Get this item to boost the one you are reading around.



This is the Screw Set for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Steel construction with black and silver finish
All screws needed to set up propellers, motors and battery frame

CONSISTS OF:
Screw Set, essential #13

This item praises the main item below.

Bearing Set Ominus/Ominus FPV Quadcopter

This is the Bearing Set for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Installs on each motor shaft at bottom of main frame, and in between
    main frame and motor equipment

CONSISTS OF:
8 3x6x2mm Ball Bearings, essential #3

Frequently acquired with the item that you are presently checking out.



This is the 1ST 3.7V 700mAh 35C LiPo Battery
for the Dromida Ominus Quadcopter FPV, DIDE02**.

FUNCTIONS:
Replaces worn or crash broken battery in the Ominus FPV
Charges through USB port or Air Conditioner adapter (not consisted of)

CONSISTS OF:
1ST 3.7V 700mAh 35C LiPo Battery with Red 2-Pin Connector, essential #15

SPECS:
Measurements: 1.6 x 0.98 x 0.35" (41.5 x 25 x 9mm)
mAh Score: 700mAh
Voltage Score: 3.7V
Discharge Rate: 35C
Watt Hours: 2.6