Dromida Main Gear Shaft Ominus FPV

These are the Main Gear Shafts
for the Dromida Ominus Quadcopter FPV, DIDE02**.

FUNCTIONS:
Aluminum building and construction

CONSISTS OF:
Four Main Gear Shafts, crucial #7

SPECS:
Length: 1.0" (25.5mm)
Size: 0.12" (3mm)

This product is often acquired with the above pointed out product.

Gear Set Ominus FPV

This is the Gear Set for the Dromida Ominus Quadcopter FPV, DIDE02**.

FUNCTIONS:
Plastic building and construction
Fits together with the pinion gear to transfer power from the motors to the
    propellers

CONSISTS OF:
Four Gears, crucial #4

Often acquired with the product that you are currently reading about.



This is the 1S 3.7V 700mAh 35C LiPo Battery
for the Dromida Ominus Quadcopter FPV, DIDE02**.

FUNCTIONS:
Replaces used or crash broken battery in the Ominus FPV
Charges through USB port or AC adapter (not included)

CONSISTS OF:
1S 3.7V 700mAh 35C LiPo Battery with Red 2-Pin Connector, crucial #15

SPECS:
Measurements: 1.6 x 0.98 x 0.35" (41.5 x 25 x 9mm)
mAh Rating: 700mAh
Voltage Rating: 3.7V
Discharge Rate: 35C
Watt Hours: 2.6

The below product also sets actually well with the product being talked about.



This is the Right Front/Left Rear Counterclockwise Rotating Motor
for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Replacement Right Front/Left Rear Counterclockwise Rotating Motor
with Pinion Gear and Wire Lead with Connector

CONSISTS OF:
Right Front/Left Rear Counterclockwise Rotating Motor, crucial #10

REMARKS:
Not interchangeable with other positions. For the Left Front/
Right Rear Clockwise Rotating Motor, order DIDE1130.

Lots of others have actually acquired this product together with the product that you are currently reading about.

Prop Set Yellow/Black Ominus FPV

This is the Yellow and Black Propeller Set
for the Dromida Ominus Quadcopter FPV, DIDE02**.

FUNCTIONS:
Versatile plastic building and construction stands up to crashes

CONSISTS OF:
2 Yellow and 2 Black Propellers, crucial #2
Four Screws

REMARKS:
When replacing propellers the color props should be installed at the
    front, and the black props should be installed at the rear
    following instructions in the manual.
Prop colors also correspond to body colors;
    Blue, DIDE02BB Red, DIDE02RR
    Green, DIDE02GG Yellow, DIDE02YY