Dromida Aluminum Heatsink 370 Motor Blue BX MT SC 4.18

This is the Motor Heatsink for the Dromida SC, MT and BX Vehicles.

FEATURES:
Aluminum building, blue in color
Installs over motor can to assist dissipate heat and prolong motor life

CONSISTS OF:
Motor Heatsink

Frequently bought with the item that you are currently reading about.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building

CONSISTS OF:
Ten Body Clips

Here is another item that praises the item being talked about.



These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Fastens A-Arms to chassis

CONSISTS OF:
Two Front and 2 Rear Inner Hinge Pins

This item praises the above talked about item.



This is the DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Load.

FEATURES:
For usage with the Duratrax Vendetta, Mini Quake and Cliff Climber however
    can likewise be utilized in other 1/18 scale applications

CONSISTS OF:
DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Load with mini
    female connector

NEEDS:
Battery charger with the ability of charging NiMH batteries, such as the DuraTrax
    IntelliPeak series or the Great Planes TRITON series

SPECIFICATIONS:
Capability: 1600mAh
Cell Size: 2/3A
# of Cells in Series: 6
Rated Voltage: 7.2V
Minutes. Release Voltage: 5.4V
Maximum Recommended Charge Current: 1.2A
Discharge Lead: 20AWG 2.4" (60mm) long wire
Pack Measurements: 86 x 34 x 17mm (3.38 x 1.33 x 0.66 inches)
Weight: 147g (5.2oz)
Variety of welds per connection: 6
Port: 1/18 scale mini female

Frequently bought with the item that you are currently reading about.



This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of put together differential

CONSISTS OF:
Four O-Rings
    Four Springs, key #35

The listed below item additionally pairs really well with the item being talked about.



This is the optional Aluminum Drive Train Plan
for usage on the Dromida BX, SC and MT Vehicles.

FEATURES:
Upgrades the stock plastic drive train components to aluminum
Blue in color

CONSISTS OF:
Center Drive Shaft, DIDC1107
Four Axles, DIDC1102
Four Dogbones, DIDC1108
Stimulate Gear w/O-Rings and Springs, DIDC1105

This is a wonderful enhancement to the item currently being talked about.



This is the stock 370 size Brushed Motor
for the Dromida SC, MT and BX Vehicles.

FEATURES:
Replaces used or broken stock motors

CONSISTS OF:
370 size Brushed Motor with Port and 22AWG Wire Leads
Two 3x6mm Socket Head Cap Screws
Two 3x6mm Washers

Numerous others have actually bought this item together with the item that you are currently reading about.



This is the optional 22T Speed Secret Brushed Motor
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Upgrades stock 370 size brushed motor provided with Dromida 1/18
    scale vehicles

CONSISTS OF:
22T Speed Secret Brushed Motor with Wire Leads and red 2-Pin
    Port

NEEDS
12T Pinion for the MT4.18, DIDC1032
13T Pinion for the BX4.18, and SC4.18, DIDC1115
Motor Heatsink, DIDC1113