Deans Micro 2B Plug

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FEATURES:
Deans Connectors offer less resistance
Lightweight
Permits existing to move extremely quickly
Enables more power

CONSISTS OF:
2 2B Micro Plugs with four sections of shrink wrap

NEEDS:
Soldering wires to plugs, can utilize HCAR0775-soldering iron

This item is frequently purchased with the above mentioned item.



This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic port body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male port (pins on both sides)
One male-female port (pins on one side)
2 pieces of little Red heat-shrinkable tubing
2 pieces of little Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering gun

SPECS:
Overall length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, 6 places: .181" (4.6mm)
Width between pins: .058" (1.4mm)

REMARKS:
The port is NOT suitable with little White
    Futaba transmitter battery adapters.

Below is a terrific item that lots of others have actually purchased the same time.

Micro 2R Plug

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides safe and secure connnection for light responsibility applications such as mini
    vehicles and Park Flyers.

INCLUDES:
2 plugs with shrink wrap

NEEDS:
Soldering leads onto the adapters

SPECS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

Regularly purchased with the item that you are currently reviewing.

1/10 Warn 9.5cti Winch

This is the RC4C 1/10 scale Warn 9.5cti Winch.

FEATURES:
Developed for use on 1/10 scale RC spiders
Runs on 6-11V battery, can run on 3S LiPo battery
Working spring loaded Warn hook with 3' (.9m) synthetic winch rope
Cast aluminum case
Marked steel parts
Quickly rebuildable
Same installing places as Bulldog winch
1 Month limited guarantee starting at date of purchase

CONSISTS OF:
RC4C 1/10 scale Warn 9.5cti Winch
Four M2.5x4mm Socket Head Cap Screws
Four M2.5x6mm Socket Head Cap Screws
Warn Decal
Working spring loaded Warn hook with 3' (.9m) synthetic winch rope

NEEDS:
Wireless Winch Controller Set, RC4C1092 (links straight to a
    battery) OR
Wired Winch Control Unit, RC4C1089 (uses radio's 3rd channel)
Axial SCX10 Chassis installing needs RC4C1160 Winch Bumper

SPECS:
Length: 2.9" (73.68mm)
Total Width: 1.25" (31.75mm)
Height: 1.31" (33.56mm)
Weight: 2.1oz (60g)
Load Limitations: Dead Lift 6.6lbs (3kgs)
Load Limitations: Rolling Drag 9lbs (4.1kgs)

REMARKS:
Warn and the Warn name are registered hallmarks of Warn Industries.
The Warn logo design is property of Warn Industries.

Below is a terrific item that lots of others have actually purchased the same time.

6" Super-Bright LED Light Bar Kit 6V-12V