Common Sense RC Paraboard - Parallel Charging Board for Lipos with EC3 Connector

Don't invest all day charging your batteries one at a time.
This Paraboard lets you charge and balance up to six lipo batteries simultaneously! This board includes EC3 plugs for your batteries' primary leads and JST-XH balance plugs ranging from 2S to SIX. They plug right into the majority of popular designs of SIX lipo balancing battery chargers that have 7-pin balance ports with 2.5mm pin spacing.
To get the most out of your Paraboard, pick up among our GT-400 battery chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.
Battery packs need to be of the exact same cell count (only charge 2S with 2S, 3S with 3S, and so on) and battery voltages need to be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, and so on) of all other batteries linked to the Paraboard at the exact same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell prior to connecting to the Paraboard.

Often acquired with the product that you are presently checking out.



Don't want to chop the existing port off of your ESC or battery? Wish to conserve yourself a bunch of soldering time? This EC3 Female to Traxxas Male Conversion Adapter is the fast, easy and inexpensive option for your mismatched port.

Below is one more product that praises the product being talked about.

XT60 Female to EC3 Male Conversion Adapter

Don't want to chop the existing port off of your ESC or battery? Wish to conserve yourself a bunch of soldering time? This XT60 Female to EC3 Male Conversion Adapter is the fast, easy and inexpensive option for your mismatched port.

Below is a excellent product that lots of others have actually bought at the same time.



This is the replacement Screw Bag B for the Tamiya
Super Clodbuster Monster Truck

FEATURES:
Steel building and construction

CONSISTS OF:
41 3x8mm self threading screws (phillips head)
46 3x12mm self threading screws (phillips head)
57 3mm shoulder nuts
2 3x20 shoulder screws (phillips head)
2 3x28 shoulder screws (phillips head)

REQUIRES:
Installation following the package manual

The below product additionally sets truly well with the product being talked about.



This product is frequently acquired with the above discussed product.



This is the Li-Po Battery Security Bag by Group C Racing

You will certainly enjoy this thing if you have the thing earlier discussed.



This is the Screw Bag for the Thunder Tiger Raptor 30 Helicopter.

FEATURES:
Steel building and construction
Black and silver in color

CONSISTS OF:
2 M3x20mm socket screws
6 M3x10mm socket screws
6 M3x12mm socket screws
6 M3x140mm socket screws
4 M3x20mm socket screws
6 M3x25mm socket screws
6 M3x32mm socket screws
6 M3x8mm socket screws
6 M3x10mm set screws
6 M3x18mm set screws
6 M4x5mm set screws

REQURIES:
Installation into helicopter

Below is a excellent product that lots of others have actually bought at the same time.

EC3 Parallel Charge lead 6 output

Quantum EC3 Parallel Charge lead 6 output Q-CL-0022

Exceptional quality charge lead.