Common Sense RC Lectron Pro 7.4V 450mAh 40C Lipo Battery with JST PH 2.0 connect

This 2-cell Lithium Polymer 450mAh battery pack is great for tons of applications, and is a fantastic choice for tons of smaller drones and aircrafts! Features a JST connector on the discharge leads and standard JST-XH balance leads. 40C constant discharge rate of 18 amps.

Dimensions:

Length: 53mm (2.08 in.)
Width: 30mm (1.18 in.)
Height: 9mm (0.35 in.)
Weight: 30g (1.05 oz)

Frequently purchased with the thing that you are currently reviewing.

IC3 Battery to JST PH2.0 Device

Specs

Accessory Type: Connectors & Adapters

Want another fantastic thing to match the above stated thing?

SCX24 Motor w/ Pinion

Want another fantastic thing to match the above stated thing?

USB Charger LiPo

Here is a fantastic thing that several others have bought at the very same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Key Features:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Practical narrow-stance rock crawler body in olive green or red
• Molded roll cage with practical light bar
• Practical chauffeur figure and many other scale details
• Formally licensed KMC XD229 Machete Crawl wheels
• Formally licensed Nitto Path Grappler M/T tires (S30 compound, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and sturdiness
• Rugged steel C-channel frame rails with bracing keep everything stiff and aligned
• Front and rear axles include a two-piece, molded plastic solid axle style
• 3-Link front and 4-link rear suspension supply ideal handling
• Coil-over shocks with simulated tank and long lasting plastic suspension links provide proven Axial crawling performance
• Front and rear differentials each house a worm equipment setup to power the axles and develop higher ground clearance. Worm equipment drive likewise provides a low equipment ratio to reduce torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the ideal rig to bring on your hiking, outdoor camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even new modelers driving the SCX24 chassis will be well-equipped to take on hard climbs and rough tracks. Like the larger SCX10™ chassis, this smaller version utilizes plenty of steel elements — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pressing onward and upward.

For the most trusted handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and long lasting plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm equipment drive setup permits a high ground clearance plus a low equipment ratio that lowers torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt flaunts competence and charisma on the tracks. Check out that Deadbolt body — with its narrow stance, bulging hood, practical chauffeur figure, and molded roll cage with practical light bar. The realism continues right down to the ground, where you’ll discover licensed KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding a lot more to its newbie appeal, the SCX24 Deadbolt comes 100% complete and all set to run. Whatever required for action is in the box: put together and finished lorry; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh two 7.4V LiPo battery; USB LiPo charger; and even 4 AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (set up)
    (1) Dynamite® 88T brushed electric motor (set up)
    (1) Axial AS-1 guiding servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh Two 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Similar to the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and strong steel c-channel frame rails with bracing to keep everything undamaged and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the correct amount of torque to assist rise high climbs. It's mated to a steel motor mount to keep flex to a minimum, which assists secure the gears.
 


WORM GEARS
The front and rear differentials each house a worm screw and worm equipment setup to get the power to the axles and develop higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones provide strength and sturdiness to keep things running throughout hard climbs and rough tracks.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and long lasting plastic suspension links delivers the crawling performance you have actually understood and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a 2 piece, molded plastic solid axle style. For ideal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two intense LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry makes use of a 4-Link style for the rear which is optimized to reduce axle steer and torque twist. We have actually likewise included additional suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and function spectacular scale details, despite the small scale.
The officially certified Nitto Path Grappler M/T Tires offer a fantastic mix of off-road performance while still keeping outstanding composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system offers easy access to on-board elements. You can quickly reach the battery and chassis by eliminating just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller in size does not imply the features require to do the same. No bushings discovered here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the entire lorry.
 

AXIAL AS-1 SERVO
Installed just above the front axle is the Axial AS-1 servo, with a servo saver that permits guiding accuracy, while likewise supplying protection for the servo gears in case of a bind or impact.
 

Specs

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (included)
Battery charger: USB LiPo charger (included)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No