Common Sense RC Lectron Pro 7.4V 450mAh 40C Lipo Battery with JST PH 2.0 connect

This 2-cell Lithium Polymer 450mAh battery pack is terrific for tons of applications, and is a great option for tons of smaller drones and planes! Features a JST adapter on the discharge leads and basic JST-XH balance leads. 40C constant discharge rate of 18 amps.

Dimensions:

Length: 53mm (2.08 in.)
Width: 30mm (1.18 in.)
Height: 9mm (0.35 in.)
Weight: 30g (1.05 oz)

Frequently acquired with the product that you are presently checking out.

IC3 Battery to JST PH2.0 Device

Specifications

Device Type: Connectors & Adapters

Want an additional great product to match the above stated product?

SCX24 Motor w/ Pinion

Want an additional great product to match the above stated product?

USB Charger LiPo

Below is a great product that lots of others have purchased the same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Secret Features:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Sensible narrow-stance rock crawler body in olive green or red
• Molded roll cage with practical light bar
• Sensible driver figure and lots of other scale information
• Officially certified KMC XD229 Machete Crawl wheels
• Officially certified Nitto Path Grappler M/T tires (S30 substance, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts permit optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones supply strength and durability
• Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
• Front and rear axles consist of a two-piece, molded plastic solid axle design
• 3-Link front and 4-link rear suspension supply ideal handling
• Coil-over shocks with simulated reservoir and durable plastic suspension links provide proven Axial crawling performance
• Front and rear differentials each home a worm equipment setup to power the axles and develop higher ground clearance. Worm equipment drive also supplies a low equipment ratio to reduce torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to take along on your hiking, outdoor camping, and other outside and indoor experiences — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to tackle difficult climbs up and rough tracks. Like the bigger SCX10™ chassis, this smaller variation uses plenty of steel elements — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pressing onward and upward.

For the most reputable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The mix of coil-over shocks and durable plastic suspension links provides Axial-worthy crawling performance even at this small scale. The worm equipment drive setup allows a high ground clearance plus a low equipment ratio that lowers torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt flaunts competence and charm on the tracks. Take a look at that Deadbolt body — with its narrow stance, bulging hood, practical driver figure, and molded roll cage with practical light bar. The realism continues right down to the ground, where you’ll discover certified KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding a lot more to its newbie appeal, the SCX24 Deadbolt comes 100% complete and all set to run. Everything needed for action is in the box: assembled and completed lorry; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electric motor and 350mAh two 7.4V LiPo battery; USB LiPo battery charger; and even four AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (installed)
    (1) Dynamite® 88T brushed electric motor (installed)
    (1) Axial AS-1 guiding servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Product Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis functions rugged and strong steel c-channel frame rails with bracing to keep everything intact and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor supplies the correct amount of torque to assist ascend high climbs up. It's mated to a steel motor mount to keep flex to a minimum, which assists secure the gears.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm equipment setup to get the power to the axles and develop higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles together with steel dogbones supply strength and durability to keep things running throughout difficult climbs up and rough tracks.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to permit optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the mix of coilover shocks with simulated reservoirs and durable plastic suspension links provides the crawling performance you have actually understood and anticipate from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a 2 piece, molded plastic solid axle design. For ideal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 intense LED lights are consisted of and are installed in the front bumper. An extra LED light port on the ESC permits you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the back which is optimized to reduce axle steer and torque twist. We have actually also consisted of additional suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially certified KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature sensational scale information, regardless of the small scale.
The officially accredited Nitto Path Grappler M/T Tires offer a wonderful mix of off-road performance while still retaining outstanding composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system provides simple access to on-board elements. You can rapidly reach the battery and chassis by removing just 2 body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller in size doesn't suggest the functions require to do the same. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire lorry.
 

AXIAL AS-1 SERVO
Installed just above the front axle is the Axial AS-1 servo, with a servo saver that permits guiding precision, while also providing protection for the servo gears in the event of a bind or impact.
 

Specifications

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Battery charger: USB LiPo battery charger (consisted of)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) diameter
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No