Axial RBX10 Ryft 1/10th 4wd KIT

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Features

Strong tube chassis design

Full-time 4WD transmission

Solid front and rear axles with sensible metal differential covers

Solidified steel universal axle set

Hard, large size WB11 Wildboar™ driveshafts

4-Link suspension system

Long travel front and rear oil-filled shocks

Formally licensed Raceline Beast wheels

Simulated disc brakes for additional realism

Interco Super Swamper TSL (3 Stage Lug) Bogger tires

Set also consists of option parts





Overview
Axial® introduces another very first with the 1/10 scale RBX10™ Ryft™ 4WD, a set that allows intermediate level RC motorists to experience the delights of rock bouncer off-road action. Full-size rock bouncers decline to stop — or even back down on the throttle — when dealing with high climbs up and huge rocks. So does the RBX10™ Ryft™ 4WD. This ground-up brand-new Axial® vehicle handles lots of abuse and loads of power!

The RBX10™ Ryft™ 4WD's robust, customized tube chassis is crafted from a high-strength composite plastic that endures the hard knocks of RC off-roading — even while moving at high speeds over tough off-road surface. Both the front and rear axles boast a resilient one-piece, molded plastic, strong axle design and sensible metal differential covers. Formally licensed Interco TSL Super Swamper Bogger tires on Raceline Beast wheels do their part to tame wild tracks, assisted by a 4-link suspension and adjustable, long travel front and rear oil shocks. These features, plus a full-time 4WD transmission, make the RBX10™ Ryft™ an interesting vehicle to take on difficult obstacles at full throttle.

The Ryft™ kit comes with a clear body for ending up in your preferred colors, plus decals and sensible interior information. Lots of option parts are also included: spool/locker, rear aluminum link plates, rear sway bar, and parts for a 2-speed or single-speed transmission setup (servo not included). Develop and end up the kit as you wish and finish it with your option of radio system, motor, ESC and battery. Then, delight in rock bouncing off-road driving over tracks, dirt, gravel, rocks and more, with an RC vehicle that's crafted to take it — the Axial® RBX10™ Ryft™ 4WD.





 






Custom Tube Chassis
Axial® is understood for customized tube chassis that are strong and well-designed. The Axial® RBX10™ Ryft™ chassis is all that and far more, with the durability to endure the hard knocks of rock bouncing.
 



Front and Rear Solid Axles
The RBX10™ Ryft™ 4WD is crafted to carry a great deal of power over penalizing off-road tracks — as evidenced by the long lasting one-piece, molded plastic, strong axle design of its front and rear axles. The axles also feature sensible metal differential covers in a raw, unfinished appearance.
 







Universal Axle Set
Solidified steel universal joint axles permit up to 45 degrees of steering and supply smoother action for a greater performing, efficient drivetrain.
 



Interco Super Swamper TSL Booger Tires
The Ryft™ 4WD's licensed reproduction Bogger tires feature a directional tread pattern with the patented Interco TSL lug design. The customized siping follows a pattern utilized by numerous expert competitive rock bouncers who desire an aggressive tire that carries out as good as it looks.
 







Aluminum Long Travel Shocks
The oil-filled shocks feature threaded bodies and a single coilover spring, plus an aluminum shock cap and pre-load adjustment for tuning the suspension to attain the very best dampening rate. The 12mm bore size allows more fluid volume for much better performance.
 



WB11 Wildboar™ Driveshafts
The RBX10™ Ryft™ 4WD kit consists of difficult, large size WB11 Wildboar™ driveshafts to handle severe power.
 







Raceline Monster Wheels
In full-size, Raceline is the most popular wheel for severe off-road duty — with a show-quality finish and shown ability to take abuse. Formally licensed Raceline Beast wheels give the 1/10 scale Ryft™ genuine looks and the strength to handle anything you can dispense.
 



4-Link Suspension
The suspension geometry utilizes a 4-link design which is optimized to reduce axle steer and to supply the proper anti-squat and roll attributes. The 4-link system also helps against suspension wrap-up in high-power applications.
 







Option Parts Included
The RBX10™ Ryft™ 4WD kit comes with parts needed to build it with a single or two-speed transmission (servo not included), in addition to optional rear sway-bar, rear aluminum link plates, and spool/locker.
 



Specs

Ball Bearings: Full set

Battery: Sold Separately

Brakes: Important with ESC (ESC not included)

Bushing Material: Metal

Battery Charger: Sold Separately

Chassis: Injection molded plastic

Conclusion Level: Set

Differential: Bevel equipment

Drive Type: Forward/Brake/Reverse

Drivetrain: 4WD

Front Track: 12.75" (323.8mm)

Equipment Pitch: MOD 1

Ground Clearance: 3.25" (82.5mm)

Motor Type: Brushless

Pinion: 17T

Power Type: Electric

Item Height: 8.75" (222 mm)

Item Length: 21.5" (546 mm)

Item Weight: 7.26lbs (3.29kg)

Item Width: 12.75" (324 mm)

Radio: Sold Separately

Receiver: Sold Separately

Scale: 1/10

Servos: Sold Separately

Shock Type: Oil-filled, Front 5.11 in (130mm), Rear 5.70 in (145mm

Speed Control: Sold Separately

Spur Equipment: 53T

Suspension: Solid axle 4-link

Tire Tread: Interco TSL Bogger

Lorry Type: Rock Racer

Water-Resistant: Yes

Wheel Type: Raceline Beast

Wheel Width: 1.6 in (40.64mm)

Wheelbase: 15.25" (387 mm)