Spektrum SX107 Micro Metal Gear Servo

Specs

Application: Little scale lorries

Equipment Material: Metal

Height: 0.87" (22.2mm)

Length: 0.89" (22.8mm)

Programmable: No

Servo Operating Voltage: 4.8 - 6.0V

Servo Type: Analog

Speed: 4.8V 0.09 sec/60°, 6.0V 0.08 sec/60°

Torque: 4.8V 34.9oz/in (2.5kg/cm), 6.0V 41.8oz/in (3.0kg/cm)

Type: Micro Metal Equipment

Weight: 0.35oz (10g)

Width: 0.49" (12.5mm)

Frequently purchased with the item that you are presently reading about.

Traxxas X-Maxx A-Arms, Upper & Lower, Green

This is a pair of optional RPM Upper and Lower A-Arms in Green
for the Traxxas X-Maxx.

FUNCTIONS:
Molded from engineering grade nylon, green in color
Stronger and lighter than stock A-Arms
Changes the stock Traxxas #7729 upper A-Arms, and the stock Traxxas
    #7730 and #7731 lower A-Arms
Lower A-Arms have geater clearance than stock A-Arms, and a double
    support beam to spread out effect energy over a larger location

INCLUDES:
One each Upper and Lower A-Arm

COMMENTS:
4 plans are required to finish one automobile

Want another excellent item to match the above discussed item?





.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]









Features

Freshly created transmission with Dig function enables a tighter turning radius by locking the rear axle for FWD power only.

Currie F9 Portal Axles boost ground clearance at the diff pumpkin for the best crawling performance.

Includes all-metal equipments, from the center transmission to the lockers and portal axles.

Tube chassis design uses maximum clearance plus practical scale looks.

All pivot points are on stainless steel balls for a long lasting, lasting suspension point.

Includes injection-molded, 3-piece, certified Raceline beadlock wheels.

Adjustable oil-filled shocks include hard anodized, threaded shock bodies, a single coilover spring, and a cap with a bleed port.

All-metal front universal axles offer smooth action and 45 degrees of guiding angle for an effective, high-performance drivetrain.

Durable, machined aluminum universal.

Finely tuned suspension geometry provides the very best crawling capabilities





Overview
The Axial® Capra™ 1.9 Unlimited Path Buggy Contractor's Kit is a "new from the ground up" design that any sophisticated RC enthusiast excited for innovative crawling will appreciate. Its Currie F9 Portal Axles offer additional ground clearance at the diff pumpkin for the best crawling performance. With the consisted of Dig transmission, you can also switch on the fly between 4WD and FWD directly from your 3-channel transmitter — locking the rear axle whenever you need the tighter turning radius of front drive power. The Capra features a reasonable tube chassis design and metal equipments everywhere, from the center transmission to the lockers and portal axles. It trips on certified Raceline 3-piece formed beadlock wheels that can be fitted with whatever 1.9 tires you prefer. For pioneering performance in an RC trail buggy package, pick the Axial Capra.





Needed to Total

Radio System

Steering Servo

ESC

Motor

Battery

Charger

Micro Servo (for Dig operation, SPMSSX107 suggested)

What remains in the Box?

(1) Axial® Capra™ 1.9 Unlimited Path Buggy 4WD Kit

(1) Product Handbook








 



CURRIE F9 PORTAL AXLES
The Currie F9 Portal Axles add significantly more ground clearance at the diff pumpkin while also providing an excellent 7.39:1 equipment ratio. Completely ball bearing driven, and metal equipments throughout for sturdiness.
 



HI-PINION GEARS
The ring and pinion equipments are machined steel, consisting of the locker. The design utilizes a 6 bolt design for sturdiness.
 






 


 


DIG TRANSMISSION
The new transmission has a Dig function that uses the tightest turning radius on a production spider in the industry. When needed, merely change from 4WD to front-wheel-drive by locking the rear axle from your transmitter. The transmission also consists of a complete set of ball bearings and all metal internal equipments for strength and durability.
NOTE: Dig performance requires an extra micro servo, not consisted of. Micro Dig Servo required, SPMSSX107 suggested (for Dig operation)
 







UNIVERSAL AXLE SET
Universal joint axles permit up to 45 degrees of steering and offer smoother action for a greater carrying out, efficient drivetrain.

Up to 45 degrees of guiding

Smooth action for an effective drivetrain

Compact yet long lasting design

Solidified steel building

 



WB8 HD WILDBOAR™ DRIVESHAFTS
WB8 HD Wildboar™ front and rear driveshafts include a larger diameter cross pin (2x11mm) in addition to an M4 Screw Shaft (2mm hex drive) for greater strength. A center splined slider drifts between each end and has included product to lower flex and tiredness.
 







6MM STAINLESS STEEL HYPERLINKS
Strong 6mm stainless steel relate to high grade plastic rod ends for sturdiness. All links are metal consisting of the steering.
 



STAINLESS STEEL PIVOT BALLS
All pivot points are on stainless steel balls that offer a long lasting, lasting suspension point.
 







SKIDPLATE WITH BOAT SIDES
The Capra features a small skidplate footprint with boat sides to help maneuver and slide over rough, tough obstacles.
 



STAINLESS STEEL STEERING LINKS
The guiding links are also made from 6mm stainless steel, providing precise steering and sturdiness.
 







LARGE BORE ALUMINUM SHOCKS
The oil-filled shocks are an all-new design with hard anodized, threaded shock bodies and a single coilover spring. Their increased bore size develops more fluid volume for better performance. A bleed screw assists to bleed air from the shock during assembly for greater consistency. The shocks are also tunable so you can attain the very best dampening rate.
 



4-LINK SUSPENSION
We have actually fine-tuned the suspension geometry with multiple mounting areas for the upper link installs to offer the very best crawling capabilities.
 







A1.9, 3-PIECE BEADLOCK WHEELS
For striking scale looks and major trail performance, we have actually outfitted the Capra™ with officially certified 3-piece Raceline Beast beadlock wheels.
 



LED LIGHT BAR
A roofing mounted LED light bar assists light the method on those late night crawls with your buddies. Additional LED lights can be added to the front headlights (optional LED lights not consisted of).
 







REALISTIC INTERIOR
Reasonable scale information include: polycarbonate interior tray with molded motorist figures, complete color pre-cut decals with simulated carbon fiber panels, mock GPS navigation determines and changes, 2 black styrene helmets with visor decals, and more!
 



GRILLE AND HEADLIGHT BUCKETS
The formed plastic front grille features 2 clear plastic headlight lenses with light pails (optional LED lights not consisted of). Behind the grille, under the hood, are 2 hood installs with clips. Eliminate the clips to raise the hood up and access to the battery tray.
 







ESC / RECEIVER TRAY
Tucked under the front dash is a cage mounted ESC / receiver tray with integrated, adjustable cable television routing to keep your circuitry arranged.
 



BATTERY TRAY
The battery tray is forward mounted, and situated under the hood. The tray size is built for shorty packs, at a maximum size of 26mm x 98mm x 47mm.
 







HOOD RELEASE
Eliminate the clips hidden on the underside of the tube frame to raise the hood up and access to the battery tray.
 



SERVO HORN WITH METAL INSERT
The servo horn features a 23T press fit metal insert for sturdiness.
 









Specifications

Approximate Assembly Time: 7-10 Hours

Ball Bearings: Full set

Batteries: Shorty configuration

Body: Unpainted panels

Brakes: Integral with ESC

Bushing Material: Metal

Charger: Sold separately

Chassis: Injection molded tubular

Completion Level: Kit

Differential: Locked

Drivetrain: 4WD Shaft Drive

Final Drive Ratio: 37:1

Gear Pitch: 32-Pitch

Ground Clearance: 3" (76.2mm)

Height: 8.25" (209.5mm)

Internal Gear Ratio: 5.14:1

Length: 17" (431.8mm)

Max Battery Dimensions: 1.02 x 3.8 x 1.8" (26 x 98 x 47mm)

Motor Size: 540 sold separately

Pinion: 14T

Radio: At least 3-channel (sold separately)

Servos: High torque steering servo (sold separately

Shock Type: Aluminum body, oil-filled, coil-over spring, soft and firm springs included

Size/Scale: 1/10

Speed Control: Axial AE-5L (sold separately) to operate light bar

Suspension: 4-link w/stainless steel pivot balls

Tire Compound: Tires sold separately

Track: Front and Rear, 8.75" (222.2mm) distance from outer edges of tires measured side-to-side

Vehicle Type: Crawler, Scale 4x4 crawler kit

Water-Resistant: Yes

Weight: 4lbs (1.8kg)

Wheel Diameter: 1.9" (48.26mm)

Wheel Hex Size: 12mm Hex

Wheel Type: Raceline 3-piece beadlock monster

Wheel Width: 1" (25.4mm)

Wheelbase: 12.5" (317.5mm)

Width: 10.25" (260.35mm)