Axial Bearing 10x15x4mm

This is a set of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building and construction, silver in color
Protected to help keep the bearing running smooth and friction free

INCLUDES:
Two Bearings

REQUIRES:
Setup following the design manual

SPECS:
Inside Size: 10mm
Outside Size: 15mm
Density: 4mm

This thing compliments the above talked about thing.

Bearing 5x11x4mm

This is a set of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building and construction, silver in color
Sealed design assists keep the bearing running smooth and friction free

INCLUDES:
Two Bearings

REQUIRES:
Setup following the design manual

SPECS:
Inside Size: 5mm
Outside Size: 11mm
Density: 4mm

Want an additional terrific thing to compliment the above discussed thing?

Bearing 5x10x4mm

This is a set of replacement 5x10x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building and construction, silver in color
Sealed design assists keep the bearing running smooth and friction free

INCLUDES:
Two Bearings

REQUIRES:
Setup following the design manual

SPECS:
Inside Size: 5mm
Outside Size: 10mm
Density: 4mm

Frequently acquired with the thing that you are presently checking out.

Bearing 8x16x5mm

This is a set of replacement 8x16x5mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building and construction, silver in color
Sealed design assists keep the bearing running smooth and friction free

INCLUDES:
Two Bearings

REQUIRES:
Setup following the design manual

SPECS:
Inside Size: 8mm
Outside Size: 16mm
Density: 5mm

Here is an additional thing that compliments the thing being talked about.



These are the CNC Machined Precision Aluminum Steering Knuckles
For the Axial Wraith

FUNCTIONS:
Our CNC Machined Aluminum Front Steering knuckles significantly improves
the toughness on your Axial Wraith, and improves the steering
reaction by taking out any flex of the stock plastic system. The
C-Hubs likewise includes more toughness and remove any unwanted flex for
the Axial Wraith and it has the exact same dimensions and adjustability as
the stock plastic unit.

These knuckles are anodized black in color.

INCLUDES:
Two guiding knuckles
4 M39x9mm cap head screws with hex sockets

SPECS:
Length: 1-3/4" (44mm)
Width: 7/16" (36mm)
Height: 1-1/4" (32mm)

COMMENTS:
These knuckles can be installed on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Package (AXID9020)

Here is a terrific thing that lots of others have purchased the exact same time.

Lectron Pro 7.4V 5200mAh 50C Lipo Deans

5200mAh 50C for under $50!
This 2-cell 5200mAh 50C lipo is ideal for 1/10 scale cars, trucks, and buggies! Features a huge capability for prolonged run times and a gigantic C rating so you'll have all the power you'll ever need. Includes a Deans-type adapter on the discharge leads.
Features

High-end performance and dependability at a budget-friendly cost
Perfect for 1/10 scale cars, trucks, and buggies
Features a huge capability for prolonged run times and a gigantic C rating so you'll have all the power you'll ever need
Includes a Deans-type adapter on the discharge leads

Requirements

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 266 g