Axial Bearing 5x11x4mm

This is a set of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building, silver in color
Sealed design helps keep the bearing running smooth and friction complimentary

CONSISTS OF:
2 Bearings

NEEDS:
Setup following the design manual

SPECIFICATIONS:
Inside Size: 5mm
Outdoors Size: 11mm
Thickness: 4mm

Want another great item to enhance the above stated item?

Bearing 10x15x4mm

This is a set of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building, silver in color
Protected to help keep the bearing running smooth and friction complimentary

CONSISTS OF:
2 Bearings

NEEDS:
Setup following the design manual

SPECIFICATIONS:
Inside Size: 10mm
Outdoors Size: 15mm
Thickness: 4mm

This item is often bought with the above stated item.

Bearing 15x21x4mm (2)

This is a set of 10x15x4mm Bearings from Axial.

FEATURES:
Stainless steel building, silver in color
Protected to help keep the bearing running smooth and friction complimentary

CONSISTS OF:
2 Bearings

NEEDS:
Setup following the design manual

SPECIFICATIONS:
Inside Size: 15mm
Outdoors Size: 21mm
Thickness: 4mm

Get this item to boost the one you read about.



These are the CNC Machined Accuracy Aluminum Steering Knuckles
For the Axial Wraith

FEATURES:
Our CNC Machined Aluminum Front Steering knuckles considerably improves
the sturdiness on your Axial Wraith, and improves the steering
response by securing any flex of the stock plastic device. The
C-Hubs likewise includes more sturdiness and remove any unwanted flex for
the Axial Wraith and it has the exact same dimensions and adjustability as
the stock plastic unit.

These knuckles are anodized black in color.

INCLUDES:
2 steering knuckles
Four M39x9mm cap head screws with hex sockets

SPECIFICATIONS:
Length: 1-3/4" (44mm)
Width: 7/16" (36mm)
Height: 1-1/4" (32mm)

REMARKS:
These knuckles can be set up on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Package (AXID9020)

Right here is another item that compliments the item being discussed.



This is the 38T Strong Bevel Gear Set for the Scorpion.

FEATURES:
Metal building, black in color

CONSISTS OF:
One pinion gear
One 38T gear

NEEDS:
Setup

Want another great item to enhance the above stated item?

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pushed fiber building
Replaces used slipper pads

CONSISTS OF:
Slipper Pad for the Axial Scorpion

NEEDS:
Installing in slipper clutch assembly following instructions in
    manual

Several others have actually bought this item together with the item that you are presently reviewing.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Crawler AXIC9001.

FEATURES:
Black plastic building

CONSISTS OF:
One 48DP 87T spur gear

NEEDS:
Setup on the Rock Crawler

The below item also sets actually well with the item being discussed.

Flange Pipe 3x4.5x5.5 (4)

These are the 3x4.5x5.5 Flange Pipes
for the Axial Scorpion Rock Crawler.

FEATURES:
Metal building, black in color

CONSISTS OF:
Four 3x4.5x5.5 flange pipelines

NEEDS:
Setup on the Rock Crawler

SPECIFICATIONS:
Length: .21" (5.5mm)
Size: .17" (4.5mm) at tiniest point
Size: .27" (7mm) at largest point