Axial 1/24 AX24 XC-1 4WS Crawler Brushed RTR, Orange

.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Features

Three 4-wheel steering (4WS) modes give drivers brand-new terrain dominating ability.

Side plate chassis enables greater articulation for enhanced handling over rough terrain.

LED rock lights mounted in the rock sliders keep your course visible in low light.

Long travel coilover shocks keep wheels on the ground to optimize traction.

4-Link front and rear suspension decreases axle guide and torque twist.

Front and rear lockers with worm equipment setup boost ground clearance.

Steel front and rear axles, stub axles, and pet dog bones supply strength.

Splined and sleeved drive shafts increase suspension travel.

Hinged body system offers easy access to on-board components.

Rockster wheels and Rock Lizards tires produce trail-taming traction.

No bushings — entire car features sealed bearings.

Dynamite 88T motor supplies the torque to dominate steep climbs.

Fully geared up — you can take off nearly immediately!





Overview
Every weekend, groups of off-road rock crawling lovers collect to follow routes towards locations far gotten rid of from the modern-day world. Their journey's end will reward them with lovely views that just a choose few ever see. However the very best memories are made during the journey itself.

Within this community are the extreme crawlers. Where others see rocks, roots, and barriers, they see puzzle pieces that form a line to maneuver up, over, and beyond. It doesn't matter if the majority of people would have trouble surviving on foot, let alone on wheels. Severe crawlers have such a deep connection to their rig that they know when it can be pressed to brand-new limits.

The 1/24 scale Axial AX24 XC-1 speaks to the extreme crawlers, and to everybody who wants to be one. With the AX24 XC-1, you'll have the ability to crawl over bigger barriers and pull tougher lines than you can with any other 1/24 scale rig.

The brand-new AX24 platform supplies stability, sturdiness, high clearance, generous articulation, and everything else extreme rock crawling lovers need to overcome the impossible. Flat chassis side plates with rock sliders help you move through tight developments. Long travel shocks, a 4-link suspension, and worm equipment drivetrain integrate for easy handling, trustworthy power shipment, and the ability to clear rough terrain.

Then there's the special AX24 4-wheel steering system. Following firmly to the line that leads from "here" to "there" has actually never been simpler. Three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl" — supply the versatility you need to maneuver over or around nearly anything in your way. This system offers all drivers brand-new terrain dominating ability!

In 2007, Axial broke brand-new ground in extreme RC crawling with the 1/10 scale AX10. If you're a long-time Axial fan, you'll like how the AX24 XC-1 pays homage to that legendary rig with a replica body and livery plus Rockster wheels and Rock Lizards tires.

The AX24 XC-1 isn't just for experienced RC rock crawling hobbyists (though you'll take pleasure in how it takes on even steeper slopes and bigger barriers than our SCX24 platform rigs). Newbies will discover it to be a fun and highly capable mini spider to work on indoor or outside courses. It's likewise a terrific way for full-blown off roading lovers to work out and refine their skills.

Get all set to press past limits and dominate more routes with the Axial AX24 XC-1 Rock Spider RTR. Due to the fact that it's totally assembled and geared up, you can start today.





 





 







FOUR-WHEEL STEERING (4WS)
The special AX24 4-wheel steering system offers all drivers brand-new terrain dominating ability. Three transmitter-activated modes — no rear tire input, mirrored rear tire input, and "crab crawl" — supply the versatility you need to maneuver over or around anything in your way.
 



SIDE PLATE CHASSIS
The durable side plate chassis is engineered to permit high clearance and generous articulation. Angled rock sliders likewise help you maneuver past rocks, roots, ledges, and other big barriers. Driving the AX24 XC-1, you go where you want to go!
 







LED LIGHTS
LED rock lights mounted in the rock sliders keep your course visible in low light. You'll have the ability to see and prevail over barriers you might not otherwise area. Day or night, the AX24 XC-1 keeps your experience alive.
 



COILOVER SHOCK ABSORBERS
Longer, 51mm coilover shocks are brand-new for the AX24 platform. Installed at an ordinary back angle in the side plate chassis, they permit increased articulation to keep the wheels on the ground and taking full advantage of traction over unequal surface areas.
 






4-LINK FRONT AND REAR SUSPENSION
The suspension geometry uses a 4-link design that works together with the AX24 side plate chassis to increase articulation and minimize axle guide and torque twist.
 



WORM GEARS
The front and rear axle housings each have a worm screw and worm equipment setup to get power to the axles and create greater ground clearance.
 






DURABLE STEEL AXLES
Steel front and rear axles, stub axles and pet dog bones supply the strength and sturdiness needed to keep keeping up confidence during hard climbs and over rough routes.
 



SPLINED DRIVE SHAFTS
The drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
 






HINGED BODY SYSTEM
The hinged body system supplies quickly, easy access to on-board components. Its hook-and-loop hinge design lets you reach the chassis and battery simply by swinging the body up.
 



ROCKSTER WHEELS & ROCK LIZARDS TIRES
In 2007, the 1/10 scale Axial AX10 platform changed RC crawling. The 1/24 scale AX24 XC-1 pays homage to that groundbreaking rig with a replica body and livery, plus 1.0" Rockster wheels and 2.44" Rock Lizards tires for nostalgic looks and trail-taming traction.
 






FULL BALL BEARINGS
Although the AX24 is smaller than many other Axial RC crawlers, it still measures up to our greatest quality requirements. For instance, you'll discover no bushings here. The drivetrain spins freely on sealed bearings throughout the entire car.
 



AXIAL AS-1 SERVOS
Axial AS-1 servos are mounted just above the axle, with servo savers that allow for guiding accuracy while protecting the servo equipments in case of a bind or effect.
 






DYNAMITE 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor supplies the correct amount of torque to dominate steep climbs. It's mated to a stamped aluminum motor mount to keep flex to a minimum and protect the equipments.
 



IMPROVED SPEKTRUM SLT3 TRANSMITTER WITH 2-IN-1 SYSTEM
The included Spektrum SLT3 transmitter is ergonomically designed for fatigue-free driving and has a foam wheel for precise fingertip control. Paired with a Spektrum 2-in-1 ESC/Receiver, its 2.4GHz signal lets you crawl in the business of several other rigs without stressing over disturbance. A brand-new throttle port functions as an ESC bypass for utilizing aftermarket ESCs without needing to purchase a brand-new receiver.
 






 



Specs

Ball Bearings: Complete Automobile

Battery: Included

Body: XC-1 Evaluated

Brakes: Integral with ESC

Charger: Included

Chassis: Side Plate

Color Variant: Orange

Conclusion Level: Ready-To-Run

Adapter Type: PH 2.0 (High-Current Ultra Micro)

Differential: Worm Gear 16T/4T

Drive Type: Forward/Brake/Reverse

Drivetrain: 4WD

Front Track: 4.5 in (113mm)

Ground Clearance: 1.3 in (34mm)

Motor Type: Brushed

Pinion: 11T

Power Type: Electric

Item Height: 3.7" (94 mm)

Item Length: 7.8" (198 mm)

Item Width: 4.5" (114 mm)

Radio: Included

Rear Track: 4.5 in (113mm)

Receiver: Included

Scale: 1/24

Servos: Included

Shock Type: Coil-over 1.35-2.0 in (35-51mm), Plastic

Speed Control: Consisted Of

Spur Gear: 55T

Guiding Type: 4WS

Suspension: Strong Axle, Front and Back

Tire Tread: Axial Rock Lizards

Automobile Type: Rock Spider

Wheel Width: 0.5 in (12.5mm)

Wheelbase: 5.3" (135 mm)