Axial 1/24 AX24 XC-1 4WS Crawler Brushed RTR, Green

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Features

Three 4-wheel steering (4WS) modes provide drivers new terrain dominating ability.

Side plate chassis allows higher expression for enhanced handling over rough terrain.

LED rock lights mounted in the rock sliders keep your course noticeable in low light.

Long travel coilover shocks keep wheels on the ground to maximize traction.

4-Link front and rear suspension decreases axle guide and torque twist.

Front and rear lockers with worm gear setup increase ground clearance.

Steel front and rear axles, stub axles, and pet bones supply strength.

Splined and sleeved drive shafts increase suspension travel.

Hinged body system offers simple access to on-board components.

Rockster wheels and Rock Lizards tires produce trail-taming traction.

No bushings — entire automobile features sealed bearings.

Dynamite 88T motor offers the torque to conquer high climbs.

Fully equipped — you can take off practically immediately!





Overview
Every weekend, groups of off-road rock crawling lovers gather to follow trails towards locations far removed from the contemporary world. Their journey's end will reward them with gorgeous views that just a select few ever see. However the very best memories are made throughout the journey itself.

Within this community are the extreme spiders. Where others see rocks, roots, and barriers, they see puzzle pieces that form a line to steer up, over, and beyond. It doesn't matter if many people would have problem surviving on foot, let alone on wheels. Severe spiders have such a deep connection to their rig that they know when it can be pushed to new limits.

The 1/24 scale Axial AX24 XC-1 speaks to the extreme spiders, and to everybody who wants to be one. With the AX24 XC-1, you'll have the ability to crawl over bigger barriers and pull harder lines than you can with any other 1/24 scale rig.

The new AX24 platform offers stability, toughness, high clearance, generous expression, and everything else extreme rock crawling lovers need to get rid of the impossible. Flat chassis side plates with rock sliders assist you move through tight formations. Long travel shocks, a 4-link suspension, and worm gear drivetrain combine for simple handling, dependable power shipment, and the capability to clear rough terrain.

Then there's the unique AX24 4-wheel steering system. Following securely to the line that leads from "here" to "there" has never been simpler. Three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl" — supply the flexibility you need to steer over or around practically anything in your way. This system offers all drivers new terrain dominating ability!

In 2007, Axial broke new ground in extreme RC crawling with the 1/10 scale AX10. If you're a veteran Axial fan, you'll like how the AX24 XC-1 admires that famous rig with a replica body and livery plus Rockster wheels and Rock Lizards tires.

The AX24 XC-1 isn't just for experienced RC rock crawling hobbyists (though you'll enjoy how it takes on even steeper inclines and bigger barriers than our SCX24 platform rigs). Newbies will find it to be a fun and extremely capable mini spider to run on indoor or outdoor courses. It's also a terrific way for full-scale off roading lovers to exercise and improve their skills.

Get ready to push previous limits and conquer more trails with the Axial AX24 XC-1 Rock Spider RTR. Since it's fully assembled and equipped, you can start today.





 





 







FOUR-WHEEL STEERING (4WS)
The unique AX24 4-wheel steering system offers all drivers new terrain dominating capability. Three transmitter-activated modes — no rear tire input, mirrored rear tire input, and "crab crawl" — supply the flexibility you need to steer over or around anything in your way.
 



SIDE PLATE CHASSIS
The long lasting side plate chassis is engineered to enable high clearance and generous expression. Angled rock sliders also assist you steer previous rocks, roots, ledges, and other large barriers. Driving the AX24 XC-1, you go where you wish to go!
 







LED LIGHTS
LED rock lights mounted in the rock sliders keep your course noticeable in low light. You'll have the ability to see and surmount barriers you may not otherwise area. Day or night, the AX24 XC-1 keeps your adventure alive.
 



COILOVER SHOCK ABSORBERS
Longer, 51mm coilover shocks are new for the AX24 platform. Installed at an ordinary back angle in the side plate chassis, they enable increased expression to keep the wheels on the ground and making the most of traction over unequal surfaces.
 






4-LINK FRONT AND REAR SUSPENSION
The suspension geometry utilizes a 4-link design that interacts with the AX24 side plate chassis to increase expression and lower axle guide and torque twist.
 



WORM GEARS
The front and rear axle housings each have a worm screw and worm gear setup to get power to the axles and produce greater ground clearance.
 






DURABLE STEEL AXLES
Steel front and rear axles, stub axles and pet bones supply the strength and toughness required to keep running with confidence throughout difficult climbs up and over rough trails.
 



SPLINED DRIVE SHAFTS
The drive shafts are splined and sleeved to allow for optimal suspension travel while keeping the power to the wheels.
 






HINGED BODY SYSTEM
The hinged body system offers quick, simple access to on-board parts. Its hook-and-loop hinge design lets you reach the chassis and battery simply by swinging the body up.
 



ROCKSTER WHEELS & ROCK LIZARDS TIRES
In 2007, the 1/10 scale Axial AX10 platform reinvented RC crawling. The 1/24 scale AX24 XC-1 admires that groundbreaking rig with a replica body and livery, plus 1.0" Rockster wheels and 2.44" Rock Lizards tires for nostalgic appearances and trail-taming traction.
 






FULL BALL BEARINGS
Although the AX24 is smaller sized than lots of other Axial RC spiders, it still measures up to our highest quality requirements. For example, you'll find no bushings here. The drivetrain spins easily on sealed bearings throughout the entire automobile.
 



AXIAL AS-1 SERVOS
Axial AS-1 servos are mounted just above the axle, with servo savers that allow for steering accuracy while safeguarding the servo equipments in the event of a bind or impact.
 






DYNAMITE 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor offers the right amount of torque to conquer high climbs up. It's mated to a stamped aluminum motor mount to keep flex to a minimum and secure the equipments.
 



IMPROVED SPEKTRUM SLT3 TRANSMITTER WITH 2-IN-1 SYSTEM
The consisted of Spektrum SLT3 transmitter is ergonomically designed for fatigue-free driving and has a foam wheel for accurate fingertip control. Paired with a Spektrum 2-in-1 ESC/Receiver, its 2.4GHz signal lets you crawl in the business of multiple other rigs without worrying about disturbance. A new throttle port works as an ESC bypass for utilizing aftermarket ESCs without needing to purchase a brand-new receiver.
 






 



Requirements

Ball Bearings: Total Car

Battery: Included

Body: XC-1 Evaluated

Brakes: Integral with ESC

Charger: Included

Chassis: Side Plate

Color Alternative: Green

Completion Level: Ready-To-Run

Adapter Type: PH 2.0 (High-Current Ultra Micro)

Differential: Worm Equipment 16T/4T

Drive Type: Forward/Brake/Reverse

Drivetrain: 4WD

Front Track: 4.5 in (113mm)

Ground Clearance: 1.3 in (34mm)

Motor Type: Brushed

Pinion: 11T

Power Type: Electric

Product Height: 3.7" (94 mm)

Product Length: 7.8" (198 mm)

Product Width: 4.5" (114 mm)

Radio: Included

Rear Track: 4.5 in (113mm)

Receiver: Included

Scale: 1/24

Servos: Included

Shock Type: Coil-over 1.35-2.0 in (35-51mm), Plastic

Speed Control: Included

Spur Equipment: 55T

Guiding Type: 4WS

Suspension: Solid Axle, Front and Back

Tire Tread: Axial Rock Lizards

Car Type: Rock Spider

Wheel Width: 0.5 in (12.5mm)

Wheelbase: 5.3" (135 mm)