Axial 1/10 SCX10 III Jeep JL Wrangler with Portals 4WD Kit

.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5; float:left; padding:10px; margin:10px; font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]









Features

Reproduction V8 engine, transmission housing and transfer case cover and secure the motor while enhancing scale look

Chassis tray accepts full-size, standard LiPo or NiMH batteries, with area on the side rails for running small pack sizes

DIG function transmission setup lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radius

Two-speed transmission setup option also available for low and high speeds

Portal axles increase ground clearance and minimize torque twist

Adjustable wheelbase chassis permits each chauffeur to choose the size of their chassis

Inner fenders and flooring sides conceal internal parts typically visible from the side of the chassis

Certified KMC Machete 3-piece beadlock wheels offer scale looks and let you eliminate and replace tires without gluing

Officially certified Nitto Path Grappler tires in a brand-new taller and larger size increase ground clearance and grip

Totally rebuildable, oil-filled shocks include hard anodized, threaded shock bodies, coilover springs, and an emulsion-style cap with screw for easier rebuilds

Clear scale Jeep® Wrangler Unlimited body with detailed interior





Overview
The 1/10 scale Axial® SCX10T III Jeep® JL Wrangler 4WD set marks the next step forward in scale off-road action. While continuing to integrate crucial parts that have actually made SCX10T cars successful, the SCX10T III increases chassis realism with information that include a reproduction V8 engine to house the front-mounted 540 motor. It's mated to a realistic transmission housing and transfer case, like a 1:1 vehicle.
The set's flexible transmission can be built in numerous ways. If you're using a 3-channel radio like the SpektrumT DX3T, you can set it up with a third-channel DIG function that lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radius. Another 3-channel option is to set up the automobile with a two-speed transmission to pick between low and high speeds. To have access to the two-speed transmission and DIG function at the same time, just add another servo and utilize a radio with at least four channels (such as the 5-channel SpektrumT DX5).
The SCX10T III Jeep® JL Wrangler set uses portal axles to enhance efficiency by increasing the ground clearance and reducing torque twist. Its standard battery tray accepts full-size standard LiPo or NiMH packs. There's also area on the side rails for motorists who choose "shorty" loads. Inner fenders and flooring sides conceal internal parts that would typically be visible from the side of the chassis.
To complement the chassis, the set features a clear Jeep® Wrangler Unlimited four-door body that's all set for ending up however you like. Scale information include a roll cage, front hood vents and cowl, windscreen wipers, mirrors, door handles and more, plus an in-depth interior. New taller and larger, formally certified Nitto Path Grappler tires on 3-piece licensed KMC Machete beadlock wheels add more scale realism and more grip on dirt, rocks, and all other off-road trails.





Needed to Total

4-Channel transmitter

4-Channel receiver

Steering servo

ESC (electronic speed controller)

Electric motor

Micro servo for rear dig function

Micro servo for 2-speed function

Battery (accepts standard and shorty packs)

Battery charger

AA batteries for transmitter

Paint (for polycarbonate plastic)

What remains in package?

(1) Axial® SCX10T III Jeep® JL Wrangler 4WD Package with clear body

(1) Product Handbook





 






SCALE ENGINE DETAIL
Scale functions consisting of a reproduction V8 engine, transmission housing, and transfer case all cover and secure your electric motor while adding to the reasonable look.
 



MULTIPLE BATTERY MOUNTING LOCATIONS
The SCX10T III Jeep® JL Wrangler has a standard battery tray that accepts full-size standard LiPo or NiMH packs. There's area on the side rails, too, for motorists who choose smaller size packs or require additional power for other accessories.
 







DIG TRANSMISSION WITH TWO-SPEED OPTION
Utilizing 3-channel control, the set's transmission can be set up one of two ways: with low and high speeds or with a DIG function that locks the rear axle from the transmitter on command, for the tighter turning radius of front wheel drive. With another servo and 4-channel control, both alternatives can be offered at the same time.
 



PORTAL OFFSET AXLE HOUSING WITH HYPOID RING AND PINION GEAR
Portal Axles like those found in some full-size off-roaders offer greater ground clearance and minimize the torque on other drivetrain parts for enhanced efficiency.
 







ADJUSTABLE WHEELBASE CHASSIS
The SCX10T III Jeep® JL Wrangler set wheelbase is adjustable with optional links, allowing you to choose the wheelbase of your choice.
 



OPTIMIZED SUSPENSION GEOMETRY
The suspension geometry is based on the SCX10T II however improved somewhat for the new chassis layout. The front suspension has been enhanced to minimize bump steer, while the rear 4-link decreases torque twist.
 







CLEAR JEEP WRANGLER UNLIMITED 4-DOOR BODY
The clear scale Jeep® Wrangler Unlimited body mirrors its full-size counterpart with an in-depth interior for "extremely scale" looks. The interior has a molded roll cage, guiding wheel, and chauffeur head. There are numerous formed scale information on the body, too: front radiator/light buckets; front hood vents; front cowl; windscreen wipers; mirrors; door handles; and fuel door.
 



INNER FENDERS AND FLOOR SIDES
The SCX10T III Jeep® JL Wrangler set body's inner fenders and flooring sides conceal internal parts that would typically be visible from the side of the chassis. The sealed receiver box can be gotten rid of to give you more area for the electronic devices of your choice. An additional tree of body posts is included, allowing you to customize your rig with any 12.3" wheel based bodies.
 







NITTO TRAIL GRAPPLER TIRES
The S30 substance Nitto Path Grappler tires included with the SCX10T III Jeep® JL Wrangler set are taller and larger (4.74 x 1.7), offering more ground clearance and more grip in the variety of surface that you will find while you're off-roading.
 



LICENSED 3-PIECE BEADLOCK WHEELS
Famous in the off-road world, these formally certified KMC XD Machete wheels are formed in satin chrome and include spectacular scale information. Because they're 3-piece beadlock wheels, tires can be installed, gotten rid of and replaced quickly without gluing.
 







ALUMINUM ADJUSTABLE COILOVER SHOCKS
The oil-filled shocks have clear anodized, threaded bodies, a single coilover spring, plus an emulsion-style cap with screw for easier rebuilds. The shocks are tunable for achieving the best dampening rate. Their increased bore size also produces more fluid volume for much better efficiency.
 



CHASSIS MOUNTED SERVO
CMS has become a requirement in scale RC and the SCX10T III is developed with that standard in mind. The servo is installed in the chassis, just as a full-size Jeep has its steering box located on the frame.
 





 



MULTIPLE TRANSMISSION OPTIONS
Utilizing a 3-channel transmitter and a micro servo, you have control as needed. The SCX10T III set transmission can be configured in one of two ways. Set it up for 2-speed using the low and high equipments or set it up for front dig to have a tighter turning radius with the rear axle locked. With a 4-channel transmitter and a 2nd micro servo, it can be configured to utilize both functions.

 




 





Requirements

Approximate Assembly Time: 7-10 Hours

Ball Bearings: Total set

Batteries: Sold individually

Body: Clear polycarbonate Jeep Wrangler Unlimited with detailed interior

Brakes: Important with ESC

Bushing Material: Metal

Battery charger: Sold individually

Chassis: Adjustable steel C-channel

Completion Level: Package

Differential: Locked

Drivetrain: 4WD

Last Drive Ratio: 45.6:1

Equipment Pitch: 32-Pitch

Ground Clearance: 3 in (76.2mm)

Height: 9.5 in (241mm)

Length: 19.125 in (485mm)

Max Battery Dimensions: 5.47 x 1.85 x 0.98 in (139 x 47 x 25mm)

Motor Size: 540 (sold individually)

Motor Type: Brushed, Brushed (sold individually)

Pinion: 14T

Radio: Sold individually

Scale: 1/10

Servos: Sold individually

Shock Type: Oil-filled coil over spring

Speed Control: Sold individually

Stimulate Equipment: 40T

Suspension: Multi-link strong axle

Tire Substance: R30

Tire Size: 4.7 in (119mm)

Tire Tread: Nitto Path Grappler M/T

Track: Front and Rear 8.9" (226mm) distance from outer edges of tires measured side to side

Vehicle Type: Crawler, Scale 4WD Crawler

Water-Resistant: Yes

Weight: 6.5 lbs (2.9kg)

Wheel Size: 1.9 in (48.3mm)

Wheel Hex Size: 12mm

Wheel Type: Injection formed 3-piece beadlock 1.9 KMC Machete

Wheel Width: 1 in (25.5mm)

Wheelbase: 12.3 in (312mm)

Width: 9.25 in (234mm)