APC 6x4 Thin Electric Prop

This is a 6x4E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft just (not for radiance engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with two adjuster rings that adapt to various motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
2 composite adapter rings
One direction sheet

NEEDS:
Assembly onto motor or equipment drive unit in your Electric plane.
Balancing

SPECIFICATIONS:
Diameter: 6"
Pitch: 4
Hub inner diameter: 0.25"

COMMENTS:
Usage Speed 400 Electric motors.

This product is regularly bought with the above mentioned product.

6x4 Speed 400 Electric Pusher Prop

This is a 6x4 Speed 400 Electric Pusher Propeller
from Advanced Precision Composites.
For use on Electric powered aircraft just, not for radiance powered engines.

FEATURES:
Constructed of Gray composite product
For Speed 400 motor applications
2 adjuster rings that adapt to various motor shafts

CONSISTS OF:
6x4 Speed 400 Electric Pusher Propeller, two adapter rings and
    direction sheet

NEEDS:
Assembly onto motor shaft or equipment drive unit in Electric aircraft

SPECIFICATIONS:
Diameter: 6"
Pitch: 4
Hub inner diameter: 0.24" (6mm) where rings are installed
Inner Diameter of Rings: 0.188" (4.8mm) and 0.236" (6mm)

Here is a wonderful product that several others have actually purchased the same time.



This is a 6x5.5E Thin Composite Propeller from Advanced Precision Composites.
For use on Electric powered aircraft just (not for radiance engines).

FEATURES:
Gray composite building

CONSISTS OF:
One 6x5.5E Thin Electric Propeller

NEEDS:
ALL props require balancing, this is ESSENTIAL, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 6"
Pitch: 5.5
Hub inner diameter: 0.25"

Regularly bought with the product that you are currently reviewing.

Prop Adapter with Collet, 2mm




Here is a wonderful product that several others have actually purchased the same time.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for use on 28mm Motors.

FEATURES:
Aluminum building

CONSISTS OF:
One Prop Saver
2 Rubber O-Rings
2 Bushings

NEEDS:
Installation on Rimfire 28mm Motor

Here is another product that compliments the product being reviewed.

Nylon Kwik-Link On 12" 2-56 Rod (5/Pkg)

These are Threaded Rods with Nylon Kwik Links.

FEATURES:
Steel rod building w/ 2-56 threads
Nylon clevis building

CONSISTS OF:
5 steel threaded rods 12" long, thread length 3/4", .072" diameter
5 2-56 nylon clevises 7/8" long

SPECIFICATIONS:
See "Includes" above

COMMENTS:
For bulk qty of 12, use DUBQ1580.

The below product additionally pairs actually well with the product being reviewed.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

CONSISTS OF:
2 control horns w/4 adjusting holes and 2 mounting holes
(3/4" long [tall])
2 mounting plates w/2 mounting holes (3/8"x3/8")
Four 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "includes" above

Here is a wonderful product that several others have actually purchased the same time.



These are two W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Eliminates the possibility of reverse polarity connections
Low resistance, compact size
Offers a safe connection for battery and motor connections on
    R/C vehicles

CONSISTS OF:
2 WS Deans 2-Pin Female Ultra Plug Connectors with area of
    shrink tubing

NEEDS:
Soldering adapters onto wires
Soldering iron HCAR0776
Solder STAR2000

COMMENTS:
For Male end use WSDM1302
For both Male and Female use WSDM3001