APC 10x4.7 Slow Flyer Propeller

This is a 10x4.7 Slo-Flyer "tractor" (not a "pusher") aircraft propeller.
This prop produces a great deal of torque even at low speeds.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building and construction minimizes rotating mass for
    greater output and longer life.
Reinforcing carbon fibers help preserve true, continuous pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft locating rings
One locating ring direction sheet

NEEDS:
ALL props require balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 10"
Pitch: 4.7

COMMENTS:
Slo-Flyer props are Not developed for Glow engines

Numerous others have actually acquired this thing in addition to the thing that you are currently reading about.

10x4.7 Slow Flyer Pusher

This is the APC 10x4.7 Slo-Flyer Pusher Electric Propeller.

FEATURES:
Foe electric and Park-Flyer type airplane
Pusher propellers molded in the opposite instructions from standard
    propellers, they are developed for planes with the motor dealing with
    in reverse in the rear of the aircraft, PUSHING the aircraft forward
Lightweight molded nylon building and construction minimizes rotating mass for
    greater output and longer life
Reinforcing fibers help preserve true, continuous pitch at any RPM

INCLUDES:
APC 10x4.7 Slo-Flyer Pusher Electric Propeller
0.236" (5.9mm) and 0.188" (4.8mm) locating rings
Instruction sheet

NEEDS:
ALL props require balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 10"
Pitch: 4.7"

COMMENTS:
Slo-Flyer props cannot be used on radiance or gasoline powered engines

Here is a great thing that many others have actually purchased the very same time.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Equipment Type : All Nylon Equipment
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Measurement : 23mm x 12mm x 29mm
Adapter Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging material:
1 x 9g TITAN Servo Sets (with accessories)

Here is another thing that compliments the thing being talked about.

9x4.7 Slow Flyer Propeller

This is a 9x4.7 Slo-Flyer "tractor" (not a "pusher") aircraft propeller.
This prop produces a great deal of torque even at low speeds.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Composite building and construction
Reinforcing carbon fibers help preserve true, continuous pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft locating rings
One locating ring direction sheet

NEEDS:
ALL props require balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 9"
Pitch: 4.7

COMMENTS:
Slo-Flyer props are Not developed for Glow engines