APC 10x4.5 Multi Rotor Pusher Propeller

This is the 10x4.5 MR Multi-Rotor Pusher Propeller from APC.
**Not for use with gas engines.**

FEATURES:
Created for counterclockwise turning only
Composite nylon construction, gray in color
Particularly designed for multi-rotor applications
Bridges the gap in between APC's Thin Electric and Slow Flyer props
MR series is lighter than the Thin Electrics, with a higher RPM
    capability than Slow Flyers

INCLUDES:
10x4.5 MR Multi-Rotor Pusher Propeller from APC

SPECS:
Hub Size: 0.65" (16.51mm)
Hub Density: 0.35" (8.89mm)
Shaft Size: 1/4" (6.35mm)
Weight: 0.53oz (15.02g)
Maximum RPM Limit: 105,000/prop size (inches)

COMMENTS:
Order APCQ0601 for LPAR06E Adapter Rings

The listed below product also pairs truly well with the product being gone over.

10x4.5 Multi Rotor Propeller

This is the 10x4.5 MR Multi-Rotor Propeller from APC.
**Not for use with gas engines.**

FEATURES:
Composite nylon construction, gray in color
Particularly designed for multi-rotor applications
Bridges the gap in between APC's Thin Electric and Slow Flyer props
MR series is lighter than the Thin Electrics, with a higher RPM
    capability than Slow Flyers

INCLUDES:
10x4.5 MR Multi-Rotor Propeller from APC

SPECS:
Hub Size: 0.65" (16.51mm)
Hub Density: 0.36" (9.14mm)
Shaft Size: 1/4" (6.35mm)
Weight: 0.53oz (15.02g)
Maximum RPM Limit: 105,000/prop size (inches)

COMMENTS:
Order APCQ0601 for LPAR06E Adapter Rings

Want an additional fantastic product to enhance the above discussed product?



Created for use with 3 wire Brushless motor systems, this is
    the 4mm Gold Bullet Port Male from Great Planes.

FEATURES:
Gold plated

INCLUDES:
Three male bullet ports

NEEDS:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .83" (21mm)
Size: .16" (4mm) outside

COMMENTS:
For the 4mm female port order GPMM3115

This product praises the main item right here.

1000Kv Brushless Outrunner Motor

These are best motors for the Gaui 330X or similar size frame.  Use with 8 or 9" props with a quad.  Consisted of in the plan is a backmount, prop adapter and two female 3.5 mm bullet ports (Male set currently soldered on motor).

A2212/13Ni-MH cells: 6-10Li-Poly cells: 2-3RPM/V: 1000 KVMax Efficiency Current: 4 - 10 A (>75%)NoLoad Current/10V: 0.5 ACurrent Capability: 12A/ 60 sMax Efficiency: 80%Shaft Size: 3.17 mmWeight With Cables: 47 gInternal Resistance: 105 MilliOhmsDimensions: 27.5 mm x 30 mmRecommended Model Weight: 300-800 gramsRecommended prop without gearbox: 10" x 5" or smaller

You will like this product if you have the product previously pointed out.



This is the Rotor Blade Set for the Estes Proto X Quadcopter, ESTE4606.

FEATURES:
Constructed of flexible plastic

INCLUDES:
2 Black and two Gray Rotor Blades

You will like this product if you have the product previously pointed out.

10x5 Thin Electric Prop

This is a 10x5E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered airplane only (not for glow engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adapter rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

NEEDS:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 10"
Pitch: 5
Hub inner size: 0.25"