APC 10x5 Thin Electric Prop

This is a 10x5E Thin Composite propeller from Advanced Accuracy Composites.
For use on Electric powered aircraft just (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adapter rings that adapt to various motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props need balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 10"
Pitch: 5
Center inner diameter: 0.25"

Frequently bought with the product that you are currently reviewing.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Just (No Wires).

FEATURES:
Shrouded wire connections (no diminish tube needed)
Wide surface area, gold-plated terminals
Reverse polarity defense makes it difficult to connect backwards
Textured surface for easy gripping
Suitable with high-current 12-gauge wire
Protect, favorable locking spring crammed terminals for constant
    contact
Multiple locking barbs keep terminals protect

CONSISTS OF:
One black female plastic port
One black male plastic port
Two sets of gold metal pins
Direction sheet

REQUIRES:
Soldering wires to the metal pins

This product compliments the main item below.

Prop Adapter with Collet, 4mm




This is a wonderful addition to the product currently being talked about.

10X6 Thin Electric Prop

This is a 10x6E Thin Composite propeller from Advanced Accuracy Composites
For use on Electric powered aircraft

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adapter rings that suit propeller center to allow
for various motor shaft diameters.

INCLUDES:
One composite propeller
5 composite adapter rings
Direction sheet

REQUIRES:
All props need balancing. The Leading Flite Power Point Propeller
Balancer (TOPQ5700) can be utilized for this purpose.
If prop reamer needed, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Size: 10" (250mm)
Pitch: 6
Center inner diameter: 0.25" (6.4mm)
Adapter sizes: 3.3mm (1/8"), 4mm (5/32"), 4.9mm (3/16"),
6.0mm (1/4"), 8.0mm (5/16")

REMARKS:
This propeller must not be utilized on gas or glow engines.

Want one more terrific product to compliment the above mentioned product?

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Measurement : 23mm x 12mm x 29mm
Adapter Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging material:
1 x 9g TITAN Servo Sets (with accessories)

This product is often bought with the above mentioned product.

10x4.5 Multi Rotor Pusher Propeller

This is the 10x4.5 MR Multi-Rotor Pusher Propeller from APC.
**Not for use with fuel engines.**

FEATURES:
Developed for counterclockwise rotating just
Composite nylon building, gray in color
Specifically developed for multi-rotor applications
Bridges the gap between APC's Thin Electric and Slow Leaflet props
MR series is lighter than the Thin Electrics, with a greater RPM
    capability than Slow Flyers

CONSISTS OF:
10x4.5 MR Multi-Rotor Pusher Propeller from APC

SPECS:
Center Size: 0.65" (16.51mm)
Center Thickness: 0.35" (8.89mm)
Shaft Size: 1/4" (6.35mm)
Weight: 0.53oz (15.02g)
Maximum RPM Limitation: 105,000/prop diameter (inches)

REMARKS:
Order APCQ0601 for LPAR06E Adapter Rings