Align Tail Boom (Black)

Specifications:
Tail boom x 2(Φ20xΦ21.5x625mm)
Tail control guide x 2
Rudder control rod(B) x 1(Φ2x657mm)
Boll link x 2

Several others have gotten this product in addition to the product that you are presently reading about.

Torque Tube

Use for T-REX 600/600 Nitro
550E DFC
***Does not fit 550L Dominator.

Includes
Torque tube x 1
Bearing MR148ZZ x 1(F8xF14x4mm)

This product is frequently gotten with the above mentioned product.

M0.8 Torque Tube Front Drive Gear Set/34T

Use for T-REX 600PRO/600EFL PRO/550E

Specifications:
600PRO Front drive gear assembly x 1
600PRO Short umbrella gear x 1
600PRO Long umbrella gear x 1

Often gotten with the product that you are presently reading about.

Torque Tube Rear Drive Gear Set

Use for T-REX 550/600 class.

Specifications:
Tail rotor shaft assembly x 1
Long umbrella gear x 1

This is a wonderful enhancement to the product presently being talked about.

550FL Flybarless Rotor Head System H55H002XX

Suitable for T-REX 550L.
Must with 550 Main Shaft Set(H55H003XXW)、600PRO Metal Main Rotor Holder(H60204)、600 Feathering Shaft(H60H001XXW) or (H60006)

Specifications:
600FL Main Rotor Housing x 1
Feathering Shaft Sleeve x 1
600DFC Head Damper x 2
600 Head Damper x 2
600FL Main Blade Grip Arm x 2
600FL Linkage rod x 2
FL Metal Control Arm x 2
Collar x 2
FMR52ZZ Bearings x 4(Φ2xΦ5x2.3mm)
683ZZ Bearings x 4(Φ3xΦ7x3mm)
CCPM Metal Swashplate x 1
700 Elevator ball link x 10
600PRO Elevator ball link x 1
Linkage rod holder x 10
Linkage rod head x 2
5 Linkage ball B ? 2(M3x4)
700N Linkage ball B ? 2(M3x4)
Socket screw x 2(M4x8mm)
Socket screw x 4(M2x5mm)
Socket screw x 2(M3x16mm)
Socket button head collar screw x 1(M4x24mm)
Socket button head collar screw x 4(M3x6mm)
Washer x 2
M4 nut x 1

The listed below product also sets actually well with the product being talked about.

600 Carbon Fiber Tail Boom-Matte Black H60T003XX

Use for T-REX 550/600/600 Nitro.
T-REX 550 Should with Tail Boom Brace(H60052A)、
Torque Tube(H60119-1)、
600 Carbon Tail Control Rod AssemblyH60221)

Specifications:
600 carbon fiber tail boom x 1(Φ20.3xΦ21.5x625mm)

Several others have gotten this product in addition to the product that you are presently reading about.

Torque Tube Bearing Holder Set

Use for T-REX 550E/600E/600Nitor /700E /700Nitro
Specifications:
Torque tube bearing holder x 2(Φ14xΦ20.7x13mm)
Bearing MR148ZZ x 4(Φ8xΦ14x4mm)
EZO Made in Japan

Several others have gotten this product in addition to the product that you are presently reading about.

New Landing Skid

This is an upgrade landing skid set for the Align 600 and 600N line of helicopters. More stiff than the basic landing gear these have actually a minimized height for a lower center of gravity preferable for 3D flying.

Package includes:

2 - Black landing skids around 39g each.




Often gotten with the product that you are presently reading about.

M0.8 Torque Tube Front Drive Gear Set (34T)

This is an Align M0.8, 34 Tooth Torque Tube Front Drive Gear Set, and is meant for use with the Align T-Rex 550 V2 and 600 Pro helicopters.
Includes:
(1) Modulus: 0.8 Front drive gear assembly (4x4.5x51mm)
(1) Front umbrella gear (20T) (21.2x33.6mm)
(1) Tail umbrella gear (20T) (21.2x12.5mm)

Note: In order to utilize this torque tube drive gear set on a T-REX 550, the helicopter needs to be geared up with the inclined gear setup. To identify if your helicopter uses inclined gears or straight-cut gears, observe the primary drive gear which will either have actually inclined or straight-cut teeth.