Align Torque Tube Bearing Holder Set

Use for T-REX 550E/600E/600Nitor /700E /700Nitro
Specs:
Torque tube bearing holder x 2(Φ14xΦ20.7x13mm)
Bearing MR148ZZ x 4(Φ8xΦ14x4mm)
EZO Made in Japan

This thing is often acquired with the above discussed thing.

Torque Tube

Use for T-REX 700 Nitro Pro /700E.
Specs:
Torque tube x 1
Torque tube end x 2
Bearing MR148ZZ x 2(Φ8xΦ14x4mm)
Torque tube pin guide x 2(Φ8x12.5x7mm)
Pin x 2(Φ2.5x9.8mm)

This thing compliments the main item here.

700F3C Landing Skid

Use for T-REX 550E/600E/600N/700E/700N.

Specs:
700F3C Landing skid x 2

You will like this product if you have the product previously pointed out.

600/700DFC Linkage Rod Set

Use for T-REX 600DFC(H60239A).
Use for T-REX 700DFC(H70089A).

Specs:
700DFC Linkage rod A ? 4(M3x14mm)
Elevator ball link ? 4

The listed below thing likewise pairs really well with the thing being reviewed.

550 3G Carbon Fiber Blades

Use for T-REX 550E Helicopter

Specification:
Shape: Balanced wing
Length:550x50x6.7mm
Width:12mm
Shaft Diameter:4mm
Weight:Appro 210g/set

The listed below thing likewise pairs really well with the thing being reviewed.

90 Carbon Fiber Tail Blade

Use for T-REX 550E.

Specs:
Shape: Balanced wing
Length: 90mm
Width: 4.9mm
Shaft Diameter: 3mm
Weight: 9g/set

This thing is often acquired with the above discussed thing.

104T M1 Autorotation tail drive gear set H70G007XX

Use for T-REX 700 Nitro.
Must with H7NG001AXW, M1 Torque Tube Front Drive Gear Set/21T.
Use for T-REX 700E/800E.
Must with H70G001AXW, M1 Torque Tube Front Drive Gear Set/22T

Specifications:
700N 104T M1 Autorotation tail drive gear set x 1
Gear Ratio 1:4.95

Many others have actually acquired this thing along with the thing that you are currently checking out.

Torque Tube Rear Drive Gear Set

Use for T-REX 700E.

Specs:
Front drive gear assembly x 1(Φ6xΦ7x82.7mm)
Long umbrella gear x 1
Tail Rotor Hub ? 1(Φ12x43.4mm)
M3 Washer ? 2(Φ3xΦ8x1mm)
M4 Set screw ? 1(M4x4mm)
Socket button head screw ? 2(M3x8mm)

This is a amazing enhancement to the thing currently being reviewed.

M0.8 Torque Tube Front Drive Gear Set/34T

Use for T-REX 600PRO/600EFL PRO/550E

Specs:
600PRO Front drive gear assembly x 1
600PRO Short umbrella gear x 1
600PRO Long umbrella gear x 1

Here is another thing that compliments the thing being reviewed.

Tail Boom (Black)

Specifications:
Tail boom x 2(Φ20xΦ21.5x625mm)
Tail control guide x 2
Rudder control rod(B) x 1(Φ2x657mm)
Boll link x 2

Here is another thing that compliments the thing being reviewed.

Tail Boom/Black

Use for T-REX 700 Nitro Pro /700E.
Specs:
Aluminum tail boom x 2(Φ20xΦ21.5x785mm)
Tail control guide x 3
Rudder control rod(B) x 1(Φ2x778mm)
Boll link x 2(Φ5x20.5mm)

This thing compliments the main item here.



The Pro CA Glues are clog-resistant with extra-long applicator pointers to quickly
reach into difficult situations. Easy to squeeze bottles aid in applying just the right
amount of glue-for simpler sanding and less mess. All Great Planes CA glues
have a satisfaction assurance, best if utilized by date and are clear.
Wicks rapidly for instantaneous bonds on tight-fitting parts, tacking and CA hinges.

Not safe for foam. For foam applications utilize epoxy or foam-safe CA.

INCLUDES:
One Pro CA Glue 1oz Thin

COMMENTS:
Thin is instantaneous setting: CA
Thick is gap filling: CA+
Extra Thick is gap filling: CA-
Replacement tip (cap)

Offered in 1/2, 1, 2, and 4 ounce sizes as follows:
GPMR6001 CA (1/2oz) GPMR6007 CA+ (1/2oz) GPMR6013 CA- (1/2oz)
GPMR6002 CA (1oz) GPMR6008 CA+ (1oz) GPMR6014 CA- (1oz)
GPMR6003 CA (2oz) GPMR6009 CA+ (2oz) GPMR6015 CA- (2oz)
GPMR6004 CA (4oz) GPMR6010 CA+ (4oz)
GPMR6020 CA Gel (1oz)

COMMENTS:
"Finest If Utilized By" date on bottom of bottle